<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Electronic Components | Sensors &amp; Electronic Components - DuoMy</title>
	<atom:link href="https://www.duomy.com/product-category/electronic-components/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.duomy.com/product-category/electronic-components/</link>
	<description></description>
	<lastBuildDate>Fri, 20 Nov 2026 01:32:43 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.5</generator>

<image>
	<url>https://www.duomy.com/wp-content/uploads/2026/04/cropped-电子-32x32.png</url>
	<title>Electronic Components | Sensors &amp; Electronic Components - DuoMy</title>
	<link>https://www.duomy.com/product-category/electronic-components/</link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>Brass Hex Standoff, M3, 12 mm, 5 mm A/F, Nickel-Plated</title>
		<link>https://www.duomy.com/products/brass-standoff-m3-hex-12mm/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:28 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/brass-standoff-m3-hex-12mm/</guid>

					<description><![CDATA[<p>Brass hex standoff, M3, 12 mm body, 5 mm across flats, nickel-plated, male-female. For boards carrying transformers, connectors or anything that needs a rigid, grounded mount.</p>
<p>The post <a href="https://www.duomy.com/products/brass-standoff-m3-hex-12mm/">Brass Hex Standoff, M3, 12 mm, 5 mm A/F, Nickel-Plated</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>Brass standoffs are used where the mechanical load is real: a board with a transformer, a DIN connector, a terminal block that receives force from a cable gland. The metal takes the torque that would strip a nylon thread, and it holds preload through thermal cycling.</p>
<p>They also conduct, which is either the point or a problem. On a board that must be grounded to the chassis at several points, a brass standoff is a low-inductance bond. On a board that needs isolation, one brass standoff among nylon ones silently defeats the whole arrangement.</p>
<h2>Key features</h2>
<ul>
<li>Brass construction, 370 MPa tensile strength</li>
<li>M3 male-female, 12 mm body, 5 mm hex</li>
<li>Nickel plating for corrosion resistance</li>
<li>Holds preload through thermal cycling</li>
<li>Conductive bond to chassis ground</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Boards carrying transformers or heavy connectors</li>
<li>Chassis grounding points</li>
<li>Vibration-exposed equipment</li>
<li>Industrial panels and enclosures</li>
</ul>
<h2>Selection note</h2>
<p>Check whether the mounting point is meant to be grounded or isolated. A single brass standoff on an otherwise insulated board creates a ground loop that is difficult to find later.</p>
<h2>Ordering</h2>
<p>Send the thread, length, hex size, plating and whether the mount must be grounded or isolated. We confirm the configuration, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/brass-standoff-m3-hex-12mm/">Brass Hex Standoff, M3, 12 mm, 5 mm A/F, Nickel-Plated</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Nylon Standoff, M3, 10 mm, Hex 6 mm, M/F</title>
		<link>https://www.duomy.com/products/standoff-m3-nylon-10mm/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:27 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/standoff-m3-nylon-10mm/</guid>

					<description><![CDATA[<p>M3 nylon standoff, 10 mm body, 6 mm hex, male-female. Electrically insulating board spacers that also isolate the mounting from chassis ground.</p>
<p>The post <a href="https://www.duomy.com/products/standoff-m3-nylon-10mm/">Nylon Standoff, M3, 10 mm, Hex 6 mm, M/F</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>A nylon standoff does two jobs. It sets the board height above the chassis, and it breaks the electrical path between the board and the metal. When a board has a single ground reference and the chassis is connected elsewhere, an insulating standoff prevents a ground loop that would otherwise appear as noise in the measurement.</p>
<p>Nylon is not a structural material at temperature. It absorbs moisture, creeps under sustained load and softens above 85 °C, so it belongs on lightweight boards in benign environments. Where the board carries transformers or heavy connectors, brass is the correct choice.</p>
<h2>Key features</h2>
<ul>
<li>M3 male-female, 10 mm body, 6 mm hex</li>
<li>Nylon 66, electrically insulating</li>
<li>Prevents chassis ground loops</li>
<li>UL 94 V-2 flammability rating</li>
<li>Available in a range of body lengths</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Isolated board mounting</li>
<li>Spacing between stacked boards</li>
<li>Panel and bracket separation</li>
<li>Low-mass assemblies with no thermal load</li>
</ul>
<h2>Selection note</h2>
<p>Do not use nylon where the joint carries sustained load or runs above 85 °C. The material creeps, the fastener loses preload and the board develops a rattle that is hard to trace.</p>
<h2>Ordering</h2>
<p>Send the thread, body length, hex size and quantity. We confirm the configuration and material, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/standoff-m3-nylon-10mm/">Nylon Standoff, M3, 10 mm, Hex 6 mm, M/F</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Two-Piece Shield Can, 30 × 30 × 5 mm, Tin-Plated Steel</title>
		<link>https://www.duomy.com/products/shielding-can-30x30x5-two-piece/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:26 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/shielding-can-30x30x5-two-piece/</guid>

					<description><![CDATA[<p>Two-piece board-level shield, 30 × 30 × 5 mm, 0.2 mm tin-plated steel with a solderable frame and a removable lid. Lets a circuit be probed or reworked without desoldering the whole can.</p>
<p>The post <a href="https://www.duomy.com/products/shielding-can-30x30x5-two-piece/">Two-Piece Shield Can, 30 × 30 × 5 mm, Tin-Plated Steel</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>A shield can works by enclosing a circuit in a conductive box and grounding the box. The seams and the lid joint are what limit performance, not the metal itself, which is why a two-piece design with a press-fit lid performs well in the lab and less well after the lid has been removed three times and no longer sits flat.</p>
<p>The practical argument for two pieces is serviceability. A one-piece can must be desoldered to reach the RF section underneath, which on a dense board risks the components around it. A frame with a removable lid costs a little height and a little isolation, and saves the board.</p>
<h2>Key features</h2>
<ul>
<li>30 × 30 × 5 mm, 0.2 mm tin-plated steel</li>
<li>Removable lid for probing and rework</li>
<li>Solderable frame with through-board locating legs</li>
<li>Matte tin plating, compatible with lead-free solder</li>
<li>Solid wall, no ventilation apertures</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>RF and wireless module shielding</li>
<li>Switching regulator EMI containment</li>
<li>Crystal and oscillator enclosures</li>
<li>Sensitive analogue front ends</li>
</ul>
<h2>Selection note</h2>
<p>Ground the frame at multiple points along every side, ideally at intervals under a quarter wavelength of the highest frequency present. A frame grounded only at the corners behaves like a slot antenna.</p>
<h2>Ordering</h2>
<p>Send the board area, component height, frequency range and whether rework access is needed. We confirm the frame footprint and lid type, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/shielding-can-30x30x5-two-piece/">Two-Piece Shield Can, 30 × 30 × 5 mm, Tin-Plated Steel</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>One-Piece Shield, 40 × 40 × 3 mm, Clip Mount</title>
		<link>https://www.duomy.com/products/board-level-shield-40x40-clips/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:26 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/board-level-shield-40x40-clips/</guid>

					<description><![CDATA[<p>One-piece board-level shield, 40 × 40 × 3 mm, 0.15 mm tin-plated steel with snap-in clips. Lowest profile option for a permanently enclosed RF or power section.</p>
<p>The post <a href="https://www.duomy.com/products/board-level-shield-40x40-clips/">One-Piece Shield, 40 × 40 × 3 mm, Clip Mount</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>A one-piece clip-on shield is the cheapest way to close a compartment. There is no frame to solder, no lid to lose, and the height above the board is only 3 mm. It goes on at final assembly and stays there.</p>
<p>The constraint is that it must go on after reflow, because the clips need plated slots in the board and the shield cannot survive the oven with components inside it. Designs that put the shield through reflow usually use a solderable frame instead, which is the two-piece construction.</p>
<h2>Key features</h2>
<ul>
<li>Low 3 mm profile above the board</li>
<li>Snap-in clips, no soldering at assembly</li>
<li>0.15 mm steel, lighter than a two-piece can</li>
<li>Fits plated slots on a standard 0.8 mm grid</li>
<li>Bright tin finish for conductivity at the clip</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Permanent RF compartment enclosures</li>
<li>DC-DC converter EMI containment</li>
<li>Wireless module shielding</li>
<li>High-volume assemblies with no rework plan</li>
</ul>
<h2>Selection note</h2>
<p>This shield goes on after reflow. If the process requires the part to pass through the oven, specify a solderable frame instead, or the plating will oxidise and the clips will lose contact.</p>
<h2>Ordering</h2>
<p>Send the compartment size, component height, assembly sequence and volume. We confirm the clip pattern and slot layout, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/board-level-shield-40x40-clips/">One-Piece Shield, 40 × 40 × 3 mm, Clip Mount</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>FFC Extension Cable, 1.0 mm Pitch, 40 Pin, 200 mm</title>
		<link>https://www.duomy.com/products/ffc-extension-1-0mm-40pin-200mm/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:25 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/ffc-extension-1-0mm-40pin-200mm/</guid>

					<description><![CDATA[<p>40-conductor FFC extension on a 1.0 mm pitch, 200 mm long, same-side contacts. Moves a display or keypad away from the main board without a custom harness.</p>
<p>The post <a href="https://www.duomy.com/products/ffc-extension-1-0mm-40pin-200mm/">FFC Extension Cable, 1.0 mm Pitch, 40 Pin, 200 mm</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>An extension cable is the pragmatic answer when a display sits 150 mm from the controller and the original cable is 80 mm. It is not a good answer for a production design, because every additional mating pair adds contact resistance and a failure point, but it is the right answer for a prototype, a retrofit or a service kit.</p>
<p>Length has an electrical cost that is easy to ignore. At 200 mm and 0.5 mm pitch the conductors are thin and closely spaced, so crosstalk and rise time degradation become visible on fast parallel buses. For a keypad or a character display it does not matter; for an RGB interface at 50 MHz it does.</p>
<h2>Key features</h2>
<ul>
<li>40 conductors on a 1.0 mm pitch, 200 mm long</li>
<li>Same-side contacts, straight type A run</li>
<li>Stiffeners at both ends for reliable insertion</li>
<li>0.5 A per conductor, 60 V rating</li>
<li>Fits standard 1.0 mm ZIF sockets</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Extending display and keypad connections</li>
<li>Prototype and evaluation setups</li>
<li>Service and retrofit kits</li>
<li>Relocating a module inside an enclosure</li>
</ul>
<h2>Selection note</h2>
<p>Keep extensions to prototype and service use. In production, specify the correct cable length and route it once; each extra mating pair costs contact resistance and adds a failure point.</p>
<h2>Ordering</h2>
<p>Send the pitch, conductor count, required length, orientation and socket type. We confirm the drawing and bend clearance, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/ffc-extension-1-0mm-40pin-200mm/">FFC Extension Cable, 1.0 mm Pitch, 40 Pin, 200 mm</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Ribbon Cable, 1.27 mm Pitch, 16 Way, 30 m Reel, 28 AWG</title>
		<link>https://www.duomy.com/products/ribbon-cable-1-27mm-16way-30m/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:24 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/ribbon-cable-1-27mm-16way-30m/</guid>

					<description><![CDATA[<p>16-way flat ribbon cable on a 1.27 mm pitch, 28 AWG, 30 m reel. Cut to length and crimp with standard IDC connectors for internal wiring harnesses.</p>
<p>The post <a href="https://www.duomy.com/products/ribbon-cable-1-27mm-16way-30m/">Ribbon Cable, 1.27 mm Pitch, 16 Way, 30 m Reel, 28 AWG</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>Ribbon cable is bought by the reel and terminated on site with IDC connectors, which press through the insulation onto every conductor in one operation. That is why it survives in low and medium volume production where a custom harness would need tooling and a lead time.</p>
<p>The 1.27 mm pitch on 28 AWG is the classic internal wiring format: sixteen signals in a 20 mm width, rated 1 A per conductor and 300 V. The impedance figure of 105 Ω only applies when alternate conductors are grounded, which is worth remembering when the cable carries a fast signal.</p>
<h2>Key features</h2>
<ul>
<li>16 conductors on 1.27 mm pitch, 28 AWG</li>
<li>30 m reel, cut to length as needed</li>
<li>IDC termination with standard connectors</li>
<li>300 V rating, 1 A per conductor</li>
<li>Stranded conductors for flexing applications</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Internal board-to-board wiring</li>
<li>IDC connector assemblies</li>
<li>Control panel and backplane links</li>
<li>Prototype and bench wiring</li>
</ul>
<h2>Selection note</h2>
<p>Ground every alternate conductor when the cable carries a signal above a few megahertz. Without a return path between conductors the 105 Ω figure does not apply and crosstalk rises sharply.</p>
<h2>Ordering</h2>
<p>Send the conductor count, pitch, length, connector type and signal speed. We confirm the gauge and insulation, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/ribbon-cable-1-27mm-16way-30m/">Ribbon Cable, 1.27 mm Pitch, 16 Way, 30 m Reel, 28 AWG</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>FFC Cable, 0.5 mm Pitch, 30 Pin, 100 mm, Same Side</title>
		<link>https://www.duomy.com/products/ffc-0-5mm-30pin-100mm/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:23 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/ffc-0-5mm-30pin-100mm/</guid>

					<description><![CDATA[<p>Flat flexible cable, 0.5 mm pitch, 30 conductors, 100 mm length, same-side contacts with blue stiffener. For board-to-board links inside compact enclosures.</p>
<p>The post <a href="https://www.duomy.com/products/ffc-0-5mm-30pin-100mm/">FFC Cable, 0.5 mm Pitch, 30 Pin, 100 mm, Same Side</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>An FFC replaces a bundle of discrete wires with a flat ribbon that has a defined pitch and a connector that latches. At 0.5 mm pitch, thirty conductors occupy 15 mm of width, which is roughly what three discrete wires would take, and the assembly step drops from thirty crimps to one insertion.</p>
<p>The type A / type B distinction is the one that causes returned parts. Type A has contacts on the same side at both ends, so the cable runs straight without a twist; type B has them on opposite sides and reverses the pin order. Plugging a type A into a socket designed for type B produces a cable that looks correct and connects every signal backwards.</p>
<h2>Key features</h2>
<ul>
<li>0.5 mm pitch, 30 conductors in a 15 mm width</li>
<li>Same-side contacts, type A, straight run</li>
<li>0.5 A per conductor, 60 V rating</li>
<li>PET stiffener for reliable connector insertion</li>
<li>105 °C insulation rating</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Board-to-board links in compact housings</li>
<li>Display and keypad connections</li>
<li>Sensor and camera module wiring</li>
<li>Printer and scanner head connections</li>
</ul>
<h2>Selection note</h2>
<p>Check the contact orientation before ordering. Type A and type B look identical in a photograph and connect in opposite order; the connector datasheet specifies which one it expects.</p>
<h2>Ordering</h2>
<p>Send the pitch, conductor count, length, contact orientation and connector part number. We confirm the drawing before production, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/ffc-0-5mm-30pin-100mm/">FFC Cable, 0.5 mm Pitch, 30 Pin, 100 mm, Same Side</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>FPC Jumper, 1.0 mm Pitch, 20 Pin, 80 mm, Opposite Side</title>
		<link>https://www.duomy.com/products/fpc-jumper-1-0mm-20pin-opposite/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:23 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/fpc-jumper-1-0mm-20pin-opposite/</guid>

					<description><![CDATA[<p>FPC jumper cable, 1.0 mm pitch, 20 conductors, 80 mm, opposite-side contacts with polyimide stiffeners at both ends. For folding a signal path around a chassis edge.</p>
<p>The post <a href="https://www.duomy.com/products/fpc-jumper-1-0mm-20pin-opposite/">FPC Jumper, 1.0 mm Pitch, 20 Pin, 80 mm, Opposite Side</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>A type B jumper has contacts on opposite faces, which lets the same footprint be used on two boards that face each other, or on a board and a connector mounted from the other side. The pin order reverses, and that is the point rather than a defect.</p>
<p>Polyimide stiffeners at both ends are what make the jumper survive repeated insertion. Without them the thin insulation creeps under the connector contact and the cable works loose after a few mating cycles, which is the most common field failure of low-cost FFC assemblies.</p>
<h2>Key features</h2>
<ul>
<li>1.0 mm pitch, 20 conductors, 80 mm length</li>
<li>Opposite-side contacts, type B</li>
<li>Polyimide stiffeners at both ends</li>
<li>1 A per conductor, 60 V rating</li>
<li>3 mm minimum static bend radius</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Folding signal paths around a chassis</li>
<li>Board-to-board links with reversed connectors</li>
<li>Display and touch panel connections</li>
<li>Instrument and test fixture wiring</li>
</ul>
<h2>Selection note</h2>
<p>Confirm the pin numbering on both connectors. A type B cable reverses the order, so pin 1 at one end lands on pin 20 at the other unless the layout accounts for it.</p>
<h2>Ordering</h2>
<p>Send the pitch, conductor count, length, orientation and both connector part numbers. We confirm the pinout drawing, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/fpc-jumper-1-0mm-20pin-opposite/">FPC Jumper, 1.0 mm Pitch, 20 Pin, 80 mm, Opposite Side</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Thin FR-4 Laminate, 0.8 mm, 1 oz, Multilayer Core</title>
		<link>https://www.duomy.com/products/fr4-ccl-thin-0-8mm/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:22 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/fr4-ccl-thin-0-8mm/</guid>

					<description><![CDATA[<p>Thin FR-4 copper-clad laminate, 0.8 mm, 1 oz, used as core material in multilayer stackups and for compact boards where 1.6 mm is too thick.</p>
<p>The post <a href="https://www.duomy.com/products/fr4-ccl-thin-0-8mm/">Thin FR-4 Laminate, 0.8 mm, 1 oz, Multilayer Core</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>A 0.8 mm core is what a four-layer board is built around: two thin laminates pressed either side of a prepreg layer, with the copper on the inner faces becoming the ground and power planes. The thickness of that core sets the plane spacing and therefore the impedance of every trace routed against it.</p>
<p>It is also used directly as a thin two-layer board where height is constrained, such as a module that has to fit under a connector or inside a slim enclosure. The mechanical trade-off is stiffness: an 0.8 mm board of the same area deflects four times as much as 1.6 mm under the same load, so support points matter more.</p>
<h2>Key features</h2>
<ul>
<li>0.8 mm thickness, half the standard build</li>
<li>1 oz copper both sides, 1220 × 1020 mm sheet</li>
<li>Suitable as core material in multilayer stackups</li>
<li>40 kV/mm dielectric strength</li>
<li>Warpage held to 0.5 percent</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Multilayer board cores</li>
<li>Slim modules with height constraints</li>
<li>Sensor and camera boards</li>
<li>Connector and card-edge assemblies</li>
</ul>
<h2>Selection note</h2>
<p>Account for the reduced stiffness in the mechanical design. An 0.8 mm board needs more mounting points or a stiffener under connectors, or the solder joints take the bending load.</p>
<h2>Ordering</h2>
<p>Send the stackup, thickness, copper weight and quantity. We confirm the core against the impedance target, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/fr4-ccl-thin-0-8mm/">Thin FR-4 Laminate, 0.8 mm, 1 oz, Multilayer Core</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Aluminium Substrate Laminate, 1.6 mm, 100 µm Dielectric</title>
		<link>https://www.duomy.com/products/aluminium-substrate-ccl-1-6mm/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Fri, 20 Nov 2026 01:29:21 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/aluminium-substrate-ccl-1-6mm/</guid>

					<description><![CDATA[<p>Aluminium-based copper-clad laminate, 1.6 mm aluminium core with a 100 µm thermally conductive dielectric and 1 oz copper. Supplied as sheet for LED and power board fabrication.</p>
<p>The post <a href="https://www.duomy.com/products/aluminium-substrate-ccl-1-6mm/">Aluminium Substrate Laminate, 1.6 mm, 100 µm Dielectric</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>This is the raw material behind every aluminium LED board: a metal plate, a thin electrically insulating but thermally conductive layer, and copper foil. The dielectric is the critical component because it has to do two contradictory jobs at once, block three kilovolts and pass heat.</p>
<p>Thickness is the trade-off. A 100 µm dielectric holds off 3 kV but adds thermal resistance; a 75 µm layer conducts better and isolates less. The choice is made by the safety requirement first and the thermal calculation second, never the other way round.</p>
<h2>Key features</h2>
<ul>
<li>1.6 mm aluminium core with 100 µm dielectric</li>
<li>1.0 to 2.0 W/m·K thermal conductivity</li>
<li>3 kV dielectric breakdown</li>
<li>Single-sided 1 oz copper</li>
<li>1000 × 1000 mm sheet format</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>LED lighting board fabrication</li>
<li>Power device carriers</li>
<li>Automotive lamp modules</li>
<li>Thermal plates with circuitry</li>
</ul>
<h2>Selection note</h2>
<p>Specify the dielectric thickness against the isolation requirement, not the thermal one. Once the safety margin is met, a thinner layer improves heat transfer, but the reverse order produces boards that fail hipot testing.</p>
<h2>Ordering</h2>
<p>Send the board size, isolation voltage, thermal target and copper weight. We confirm the dielectric thickness and sheet format, then quote.</p>
<p>The post <a href="https://www.duomy.com/products/aluminium-substrate-ccl-1-6mm/">Aluminium Substrate Laminate, 1.6 mm, 100 µm Dielectric</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
