Ask about this product
Send your application details and get a specification answer within one business day.
Two-Piece Shield Can, 30 × 30 × 5 mm, Tin-Plated Steel
Two-piece board-level shield, 30 × 30 × 5 mm, 0.2 mm tin-plated steel with a solderable frame and a removable lid. Lets a circuit be probed or reworked without desoldering the whole can.
| Parameter | Value | Unit |
|---|---|---|
| Dimensions | 30 × 30 × 5 | mm |
| Material | Tin-plated steel, 0.20 | mm |
| Construction | Two-piece, frame plus lid | |
| Mounting | Solderable frame, through-board legs | |
| Plating | Matte tin | |
| Lid retention | Press fit, removable | |
| Aperture | None, solid wall | |
| Operating temperature | −40 to +125 | °C |
| Tolerance | ±0.15 | mm |
| Packaging | Tray, 100 per tray |
Overview
A shield can works by enclosing a circuit in a conductive box and grounding the box. The seams and the lid joint are what limit performance, not the metal itself, which is why a two-piece design with a press-fit lid performs well in the lab and less well after the lid has been removed three times and no longer sits flat.
The practical argument for two pieces is serviceability. A one-piece can must be desoldered to reach the RF section underneath, which on a dense board risks the components around it. A frame with a removable lid costs a little height and a little isolation, and saves the board.
Key features
- 30 × 30 × 5 mm, 0.2 mm tin-plated steel
- Removable lid for probing and rework
- Solderable frame with through-board locating legs
- Matte tin plating, compatible with lead-free solder
- Solid wall, no ventilation apertures
Typical applications
- RF and wireless module shielding
- Switching regulator EMI containment
- Crystal and oscillator enclosures
- Sensitive analogue front ends
Selection note
Ground the frame at multiple points along every side, ideally at intervals under a quarter wavelength of the highest frequency present. A frame grounded only at the corners behaves like a slot antenna.
Ordering
Send the board area, component height, frequency range and whether rework access is needed. We confirm the frame footprint and lid type, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-SHLD-40-3
One-Piece Shield, 40 × 40 × 3 mm, Clip Mount
DM-STD-B-M3-12