DM-FFC-10-40P-200
Ask about this product
Send your application details and get a specification answer within one business day.
Ribbon Cable, 1.27 mm Pitch, 16 Way, 30 m Reel, 28 AWG
16-way flat ribbon cable on a 1.27 mm pitch, 28 AWG, 30 m reel. Cut to length and crimp with standard IDC connectors for internal wiring harnesses.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 1.27 | mm |
| Conductors | 16 | |
| Wire gauge | 28 | AWG |
| Length | 30 | m reel |
| Voltage rating | 300 | V |
| Current rating | 1 | A per conductor |
| Conductor | Stranded tinned copper | |
| Insulation | PVC, grey | |
| Impedance | 105 | Ω nominal, driven / ground |
| Operating temperature | −20 to +105 | °C |
Overview
Ribbon cable is bought by the reel and terminated on site with IDC connectors, which press through the insulation onto every conductor in one operation. That is why it survives in low and medium volume production where a custom harness would need tooling and a lead time.
The 1.27 mm pitch on 28 AWG is the classic internal wiring format: sixteen signals in a 20 mm width, rated 1 A per conductor and 300 V. The impedance figure of 105 Ω only applies when alternate conductors are grounded, which is worth remembering when the cable carries a fast signal.
Key features
- 16 conductors on 1.27 mm pitch, 28 AWG
- 30 m reel, cut to length as needed
- IDC termination with standard connectors
- 300 V rating, 1 A per conductor
- Stranded conductors for flexing applications
Typical applications
- Internal board-to-board wiring
- IDC connector assemblies
- Control panel and backplane links
- Prototype and bench wiring
Selection note
Ground every alternate conductor when the cable carries a signal above a few megahertz. Without a return path between conductors the 105 Ω figure does not apply and crosstalk rises sharply.
Ordering
Send the conductor count, pitch, length, connector type and signal speed. We confirm the gauge and insulation, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-FPC-10-20P
FPC Jumper, 1.0 mm Pitch, 20 Pin, 80 mm, Opposite Side
DM-FFC-05-30P