DM-CCL-HTG-170
Ask about this product
Send your application details and get a specification answer within one business day.
Thin FR-4 Laminate, 0.8 mm, 1 oz, Multilayer Core
Thin FR-4 copper-clad laminate, 0.8 mm, 1 oz, used as core material in multilayer stackups and for compact boards where 1.6 mm is too thick.
| Parameter | Value | Unit |
|---|---|---|
| Material | FR-4, woven glass / epoxy | |
| Thickness | 0.8 | mm ±0.08 |
| Copper weight | 1 / 1 | oz both sides |
| Sheet size | 1220 × 1020 | mm |
| Glass transition temperature | 135 to 140 | °C |
| Dielectric constant | 4.5 to 4.7 | at 1 MHz |
| Dielectric strength | 40 | kV/mm |
| Flammability | UL 94 V-0 | |
| Warpage | 0.5 | % maximum |
| Peel strength | 1.4 | N/mm minimum |
Overview
A 0.8 mm core is what a four-layer board is built around: two thin laminates pressed either side of a prepreg layer, with the copper on the inner faces becoming the ground and power planes. The thickness of that core sets the plane spacing and therefore the impedance of every trace routed against it.
It is also used directly as a thin two-layer board where height is constrained, such as a module that has to fit under a connector or inside a slim enclosure. The mechanical trade-off is stiffness: an 0.8 mm board of the same area deflects four times as much as 1.6 mm under the same load, so support points matter more.
Key features
- 0.8 mm thickness, half the standard build
- 1 oz copper both sides, 1220 × 1020 mm sheet
- Suitable as core material in multilayer stackups
- 40 kV/mm dielectric strength
- Warpage held to 0.5 percent
Typical applications
- Multilayer board cores
- Slim modules with height constraints
- Sensor and camera boards
- Connector and card-edge assemblies
Selection note
Account for the reduced stiffness in the mechanical design. An 0.8 mm board needs more mounting points or a stiffener under connectors, or the solder joints take the bending load.
Ordering
Send the stackup, thickness, copper weight and quantity. We confirm the core against the impedance target, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-CCL-AL-16
Aluminium Substrate Laminate, 1.6 mm, 100 µm Dielectric
DM-CCL-FR4-16