DM-STD-B-M3-12
Ask about this product
Send your application details and get a specification answer within one business day.
One-Piece Shield, 40 × 40 × 3 mm, Clip Mount
One-piece board-level shield, 40 × 40 × 3 mm, 0.15 mm tin-plated steel with snap-in clips. Lowest profile option for a permanently enclosed RF or power section.
| Parameter | Value | Unit |
|---|---|---|
| Dimensions | 40 × 40 × 3 | mm |
| Material | Tin-plated steel, 0.15 | mm |
| Construction | One-piece, clip mount | |
| Mounting | Snap-in clips into plated slots | |
| Plating | Matte tin | |
| Removability | Not intended for removal | |
| Operating temperature | −40 to +125 | °C |
| Tolerance | ±0.15 | mm |
| Packaging | Tray, 100 per tray | |
| Finish | Bright tin, solderable |
Overview
A one-piece clip-on shield is the cheapest way to close a compartment. There is no frame to solder, no lid to lose, and the height above the board is only 3 mm. It goes on at final assembly and stays there.
The constraint is that it must go on after reflow, because the clips need plated slots in the board and the shield cannot survive the oven with components inside it. Designs that put the shield through reflow usually use a solderable frame instead, which is the two-piece construction.
Key features
- Low 3 mm profile above the board
- Snap-in clips, no soldering at assembly
- 0.15 mm steel, lighter than a two-piece can
- Fits plated slots on a standard 0.8 mm grid
- Bright tin finish for conductivity at the clip
Typical applications
- Permanent RF compartment enclosures
- DC-DC converter EMI containment
- Wireless module shielding
- High-volume assemblies with no rework plan
Selection note
This shield goes on after reflow. If the process requires the part to pass through the oven, specify a solderable frame instead, or the plating will oxidise and the clips will lose contact.
Ordering
Send the compartment size, component height, assembly sequence and volume. We confirm the clip pattern and slot layout, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-SHLD-30-5