DM-FFC-05-30P
Ask about this product
Send your application details and get a specification answer within one business day.
FFC Extension Cable, 1.0 mm Pitch, 40 Pin, 200 mm
40-conductor FFC extension on a 1.0 mm pitch, 200 mm long, same-side contacts. Moves a display or keypad away from the main board without a custom harness.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 1.0 | mm |
| Conductors | 40 | |
| Length | 200 | mm |
| Contact orientation | Same side, type A | |
| Voltage rating | 60 | V |
| Current rating | 0.5 | A per conductor |
| Conductor | Tin-plated copper | |
| Insulation | Polyester, 0.12 mm | |
| Stiffener | PET, 0.2 mm, both ends | |
| Operating temperature | −40 to +105 | °C |
Overview
An extension cable is the pragmatic answer when a display sits 150 mm from the controller and the original cable is 80 mm. It is not a good answer for a production design, because every additional mating pair adds contact resistance and a failure point, but it is the right answer for a prototype, a retrofit or a service kit.
Length has an electrical cost that is easy to ignore. At 200 mm and 0.5 mm pitch the conductors are thin and closely spaced, so crosstalk and rise time degradation become visible on fast parallel buses. For a keypad or a character display it does not matter; for an RGB interface at 50 MHz it does.
Key features
- 40 conductors on a 1.0 mm pitch, 200 mm long
- Same-side contacts, straight type A run
- Stiffeners at both ends for reliable insertion
- 0.5 A per conductor, 60 V rating
- Fits standard 1.0 mm ZIF sockets
Typical applications
- Extending display and keypad connections
- Prototype and evaluation setups
- Service and retrofit kits
- Relocating a module inside an enclosure
Selection note
Keep extensions to prototype and service use. In production, specify the correct cable length and route it once; each extra mating pair costs contact resistance and adds a failure point.
Ordering
Send the pitch, conductor count, required length, orientation and socket type. We confirm the drawing and bend clearance, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-FPC-10-20P
FPC Jumper, 1.0 mm Pitch, 20 Pin, 80 mm, Opposite Side
DM-RBN-127-16W