DM-CCL-FR4-16
Ask about this product
Send your application details and get a specification answer within one business day.
Aluminium Substrate Laminate, 1.6 mm, 100 µm Dielectric
Aluminium-based copper-clad laminate, 1.6 mm aluminium core with a 100 µm thermally conductive dielectric and 1 oz copper. Supplied as sheet for LED and power board fabrication.
| Parameter | Value | Unit |
|---|---|---|
| Base | Aluminium, 1.6 | mm |
| Dielectric thickness | 100 | µm |
| Thermal conductivity | 1.0 to 2.0 | W/m·K |
| Copper weight | 1 | oz, single side |
| Sheet size | 1000 × 1000 | mm |
| Dielectric breakdown | 3 | kV |
| Peel strength | 1.0 | N/mm minimum |
| Thermal resistance | 0.05 to 0.1 | °C·cm²/W |
| Surface | Brush or protective film | |
| Operating temperature | −40 to +150 | °C |
Overview
This is the raw material behind every aluminium LED board: a metal plate, a thin electrically insulating but thermally conductive layer, and copper foil. The dielectric is the critical component because it has to do two contradictory jobs at once, block three kilovolts and pass heat.
Thickness is the trade-off. A 100 µm dielectric holds off 3 kV but adds thermal resistance; a 75 µm layer conducts better and isolates less. The choice is made by the safety requirement first and the thermal calculation second, never the other way round.
Key features
- 1.6 mm aluminium core with 100 µm dielectric
- 1.0 to 2.0 W/m·K thermal conductivity
- 3 kV dielectric breakdown
- Single-sided 1 oz copper
- 1000 × 1000 mm sheet format
Typical applications
- LED lighting board fabrication
- Power device carriers
- Automotive lamp modules
- Thermal plates with circuitry
Selection note
Specify the dielectric thickness against the isolation requirement, not the thermal one. Once the safety margin is met, a thinner layer improves heat transfer, but the reverse order produces boards that fail hipot testing.
Ordering
Send the board size, isolation voltage, thermal target and copper weight. We confirm the dielectric thickness and sheet format, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-CCL-HTG-170
High-Tg FR-4 Laminate, Tg ≥170 °C, 1.6 mm, 1 oz
DM-CCL-THN-08