DM-SHLD-40-3
Ask about this product
Send your application details and get a specification answer within one business day.
Nylon Standoff, M3, 10 mm, Hex 6 mm, M/F
M3 nylon standoff, 10 mm body, 6 mm hex, male-female. Electrically insulating board spacers that also isolate the mounting from chassis ground.
| Parameter | Value | Unit |
|---|---|---|
| Thread | M3 | |
| Body length | 10 | mm |
| Hex across flats | 6 | mm |
| Configuration | Male-female | |
| Material | Nylon 66, natural | |
| Flammability | UL 94 V-2 | |
| Thread length | 6 | mm male, 6 mm female depth |
| Operating temperature | −40 to +85 | °C |
| Dielectric strength | 5 | kV/mm |
| Packaging | Bag of 100 |
Overview
A nylon standoff does two jobs. It sets the board height above the chassis, and it breaks the electrical path between the board and the metal. When a board has a single ground reference and the chassis is connected elsewhere, an insulating standoff prevents a ground loop that would otherwise appear as noise in the measurement.
Nylon is not a structural material at temperature. It absorbs moisture, creeps under sustained load and softens above 85 °C, so it belongs on lightweight boards in benign environments. Where the board carries transformers or heavy connectors, brass is the correct choice.
Key features
- M3 male-female, 10 mm body, 6 mm hex
- Nylon 66, electrically insulating
- Prevents chassis ground loops
- UL 94 V-2 flammability rating
- Available in a range of body lengths
Typical applications
- Isolated board mounting
- Spacing between stacked boards
- Panel and bracket separation
- Low-mass assemblies with no thermal load
Selection note
Do not use nylon where the joint carries sustained load or runs above 85 °C. The material creeps, the fastener loses preload and the board develops a rattle that is hard to trace.
Ordering
Send the thread, body length, hex size and quantity. We confirm the configuration and material, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-SHLD-30-5
Two-Piece Shield Can, 30 × 30 × 5 mm, Tin-Plated Steel
DM-STD-B-M3-12