DM-RBN-127-16W
Ask about this product
Send your application details and get a specification answer within one business day.
FPC Jumper, 1.0 mm Pitch, 20 Pin, 80 mm, Opposite Side
FPC jumper cable, 1.0 mm pitch, 20 conductors, 80 mm, opposite-side contacts with polyimide stiffeners at both ends. For folding a signal path around a chassis edge.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 1.0 | mm |
| Conductors | 20 | |
| Length | 80 | mm |
| Contact orientation | Opposite side, type B | |
| Voltage rating | 60 | V |
| Current rating | 1 | A per conductor |
| Conductor | Tin-plated copper | |
| Insulation | Polyimide, 0.1 mm | |
| Stiffener | Polyimide, 0.2 mm, both ends | |
| Bend radius | 3 | mm minimum, static |
Overview
A type B jumper has contacts on opposite faces, which lets the same footprint be used on two boards that face each other, or on a board and a connector mounted from the other side. The pin order reverses, and that is the point rather than a defect.
Polyimide stiffeners at both ends are what make the jumper survive repeated insertion. Without them the thin insulation creeps under the connector contact and the cable works loose after a few mating cycles, which is the most common field failure of low-cost FFC assemblies.
Key features
- 1.0 mm pitch, 20 conductors, 80 mm length
- Opposite-side contacts, type B
- Polyimide stiffeners at both ends
- 1 A per conductor, 60 V rating
- 3 mm minimum static bend radius
Typical applications
- Folding signal paths around a chassis
- Board-to-board links with reversed connectors
- Display and touch panel connections
- Instrument and test fixture wiring
Selection note
Confirm the pin numbering on both connectors. A type B cable reverses the order, so pin 1 at one end lands on pin 20 at the other unless the layout accounts for it.
Ordering
Send the pitch, conductor count, length, orientation and both connector part numbers. We confirm the pinout drawing, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-FFC-05-30P
FFC Cable, 0.5 mm Pitch, 30 Pin, 100 mm, Same Side
DM-FFC-10-40P-200