<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Sensing &amp; Automation | Sensors &amp; Electronic Components - DuoMy</title>
	<atom:link href="https://www.duomy.com/product-category/sensing-automation/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.duomy.com/product-category/sensing-automation/</link>
	<description></description>
	<lastBuildDate>Sat, 31 Oct 2026 09:57:11 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.5</generator>

<image>
	<url>https://www.duomy.com/wp-content/uploads/2026/04/cropped-电子-32x32.png</url>
	<title>Sensing &amp; Automation | Sensors &amp; Electronic Components - DuoMy</title>
	<link>https://www.duomy.com/product-category/sensing-automation/</link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>DM-CB10 M8 4-Pin Field-Attachable Connector</title>
		<link>https://www.duomy.com/products/dm-cb10-field-attachable-connector/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:26 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-cb10-field-attachable-connector/</guid>

					<description><![CDATA[<p>M8 4-pin field-attachable connector with screw terminals, reusable housing and IP67 sealing, for on-site repair and short custom cable runs.</p>
<p>The post <a href="https://www.duomy.com/products/dm-cb10-field-attachable-connector/">DM-CB10 M8 4-Pin Field-Attachable Connector</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-CB10 lets a maintenance technician build or repair a sensor cable on site with a screwdriver and no special tooling. The housing unscrews, the conductors go into screw terminals, and the seal insert grips the cable jacket as the body is reassembled.</p>
<p>It is a repair part, not a production part. For machines leaving the factory, an overmoulded cordset is more consistent because the seal is formed under controlled conditions. For a cable damaged at 2 a.m. on a running line, the field-attachable connector is what gets the machine back.</p>
<h2>Key features</h2>
<ul>
<li>M8 A-coded, 4-pin, screw terminal connection</li>
<li>Reusable housing with replaceable seal insert</li>
<li>Cable range 3.5-5.5 mm</li>
<li>IP67 in the mated and correctly assembled condition</li>
<li>2 A per contact, 30 V AC/DC</li>
<li>No crimping tool required</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>On-site repair of damaged sensor cables</li>
<li>Short custom cable runs in prototype machines</li>
<li>Spare-part stock for maintenance cribs</li>
<li>Temporary instrumentation during commissioning</li>
</ul>
<h2>Assembly note</h2>
<p>Strip 20 mm of jacket and 4 mm of insulation, keep the strand twist intact, and tighten each terminal firmly without cutting strands. Check continuity pin to pin and confirm the seal insert matches the cable diameter before the connector goes into service.</p>
<p>The post <a href="https://www.duomy.com/products/dm-cb10-field-attachable-connector/">DM-CB10 M8 4-Pin Field-Attachable Connector</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-CJ08 8-Port M12 Junction Box, IP67</title>
		<link>https://www.duomy.com/products/dm-cj08-junction-box/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:25 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-cj08-junction-box/</guid>

					<description><![CDATA[<p>Passive 8-port M12 junction box that consolidates sensor wiring into a single home-run cable, with LED indication per port and an IP67 PBT housing.</p>
<p>The post <a href="https://www.duomy.com/products/dm-cj08-junction-box/">DM-CJ08 8-Port M12 Junction Box, IP67</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-CJ08 collects eight sensor cables into one multi-core home run, which reduces the number of cables entering a cabinet from eight to one and makes a machine section easier to isolate and service. Each port has an LED so a technician can see the signal state without opening the box.</p>
<p>The housing is PBT with a gasket and stainless screws, rated IP67 in the mated condition. Ports are 3, 4 or 5-pin M12, and the home run is a fixed 5 m or 10 m cable with a connector or flying leads.</p>
<h2>Key features</h2>
<ul>
<li>8 x M12 ports, 3/4/5-pin configuration</li>
<li>Single home-run cable to the cabinet</li>
<li>Per-port LED indication</li>
<li>IP67 PBT housing with stainless fasteners</li>
<li>2 A per port, 30 V AC/DC</li>
<li>Optional stainless housing for washdown and chemical areas</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Sensor clusters on conveyor sections</li>
<li>End-effector and gripper wiring consolidation</li>
<li>Pump station instrument collection</li>
<li>Machine sections with frequent changeover</li>
</ul>
<h2>Selection note</h2>
<p>A passive box carries the signals only; it does not condition or isolate them. If the sensors are far from the cabinet or the environment is electrically noisy, use a master with per-port diagnostics, or add an isolating conditioner at the cabinet end.</p>
<p>The post <a href="https://www.duomy.com/products/dm-cj08-junction-box/">DM-CJ08 8-Port M12 Junction Box, IP67</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-SD24 Loop-Powered Digital Indicator with 2 Relays</title>
		<link>https://www.duomy.com/products/dm-sd24-loop-powered-indicator/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:24 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-sd24-loop-powered-indicator/</guid>

					<description><![CDATA[<p>Two-wire loop-powered indicator that shows the 4-20 mA value at the machine and provides two configurable alarm relays, without an additional power supply.</p>
<p>The post <a href="https://www.duomy.com/products/dm-sd24-loop-powered-indicator/">DM-SD24 Loop-Powered Digital Indicator with 2 Relays</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-SD24 takes its power from the current loop it is measuring, so installing it means breaking the loop and inserting the indicator, nothing more. It displays the scaled value in engineering units and provides two relays that can be set as high, low or window alarms with adjustable hysteresis and delay.</p>
<p>That combination replaces a separate display and trip amplifier in many panels. It is particularly useful on remote or skid-mounted equipment where an operator needs to see the value and where a local alarm must act even if the control system is offline.</p>
<h2>Key features</h2>
<ul>
<li>Two-wire, loop-powered, no separate supply required</li>
<li>4-digit display with configurable engineering units and scaling</li>
<li>Two relays configurable as high, low or window alarm</li>
<li>Adjustable hysteresis and 0-60 s alarm delay</li>
<li>IP65 front face for panel or field mounting</li>
<li>Voltage drop of only 2.5 V, minimising loop burden</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Local readout on pump and valve skids</li>
<li>Over-temperature and dry-run alarms</li>
<li>Level indication on remote tanks</li>
<li>Flow totalising display at a metering point</li>
</ul>
<h2>Loop budget note</h2>
<p>A two-wire indicator adds to the loop resistance. Check that the transmitter&#8217;s minimum supply voltage plus the indicator&#8217;s voltage drop plus the cable and sense resistor still falls below the available supply, especially on 12 V loops.</p>
<p>The post <a href="https://www.duomy.com/products/dm-sd24-loop-powered-indicator/">DM-SD24 Loop-Powered Digital Indicator with 2 Relays</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-CB05 M12 5-Pin Shielded Sensor Cable, 5 m PUR</title>
		<link>https://www.duomy.com/products/dm-cb05-m12-sensor-cable/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:24 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-cb05-m12-sensor-cable/</guid>

					<description><![CDATA[<p>Overmoulded M12 5-pin shielded cordset, 5 m PUR jacket, IP69K, straight or angled, for sensor connections in coolant and washdown areas.</p>
<p>The post <a href="https://www.duomy.com/products/dm-cb05-m12-sensor-cable/">DM-CB05 M12 5-Pin Shielded Sensor Cable, 5 m PUR</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-CB05 is an overmoulded five-pin cordset for standard sensor connections. The moulded body seals the conductor entry permanently, which removes the gland that is responsible for most water ingress in field-wired connectors, and the PUR jacket resists coolant, oil and repeated flexing.</p>
<p>Shielding is included as standard, because the cost difference against unshielded cable is small and the benefit in any panel with a drive is large. The shield is bonded to the coupling nut so it terminates at the sensor housing and at the panel gland.</p>
<h2>Key features</h2>
<ul>
<li>M12 A-coded, 5-pin, straight or 90° angled</li>
<li>Shielded construction with braid coverage over 85%</li>
<li>PUR jacket resistant to coolant, oil and UV</li>
<li>IP69K in the mated condition</li>
<li>2 A per contact, 30 V AC/DC rated</li>
<li>Available in 0.3, 2, 5 and 10 m lengths from stock</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Sensor and actuator connections on machine tools</li>
<li>Washdown areas in food and beverage plants</li>
<li>Gripper and end-effector wiring</li>
<li>IO-Link device connections at 230 kbit/s</li>
</ul>
<h2>Installation note</h2>
<p>Tighten the coupling nut by hand and then a quarter turn; over-tightening distorts the seal and under-tightening lets water in. Respect the bend radius at the connector body, because the failure point on a moulded cordset is where the cable leaves the moulding.</p>
<p>The post <a href="https://www.duomy.com/products/dm-cb05-m12-sensor-cable/">DM-CB05 M12 5-Pin Shielded Sensor Cable, 5 m PUR</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-SC08 8-Port IO-Link Master, IP67</title>
		<link>https://www.duomy.com/products/dm-sc08-io-link-master/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:23 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-sc08-io-link-master/</guid>

					<description><![CDATA[<p>Field-mounted IO-Link master with eight class A ports, PROFINET or EtherNet/IP uplink, IP67 housing and parameter storage for automatic sensor replacement.</p>
<p>The post <a href="https://www.duomy.com/products/dm-sc08-io-link-master/">DM-SC08 8-Port IO-Link Master, IP67</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-SC08 brings eight IO-Link sensors onto an industrial Ethernet network from a field-mounted box, removing the need to run individual analogue or discrete cables back to the cabinet. Each port is class A, so standard three-wire sensor cable works, and the master stores the parameter set for every connected device.</p>
<p>Parameter storage is the feature that changes maintenance. When a sensor is replaced, the master writes the stored parameters into the new device automatically, so a technician does not need a laptop, a configuration file or a recipe sheet at the machine.</p>
<h2>Key features</h2>
<ul>
<li>Eight IO-Link class A ports, IO-Link 1.1</li>
<li>PROFINET, EtherNet/IP or Modbus TCP uplink</li>
<li>Automatic parameter storage and device replacement</li>
<li>IP67 die-cast housing for direct machine mounting</li>
<li>Per-port current monitoring and short-circuit diagnostics</li>
<li>M12 A-coded ports, 2 A per port</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Smart sensor clusters on assembly stations</li>
<li>Gripper and end-effector sensor integration</li>
<li>Retrofit of analogue sensors with IO-Link converters</li>
<li>Diagnostics access on guarded or hidden sensors</li>
</ul>
<h2>Network note</h2>
<p>IO-Link runs at 230.4 kbit/s over an unshielded three-wire cable up to 20 m. Keep the cable away from drive output cables and use the master&#8217;s port diagnostics to confirm the signal quality before commissioning the line.</p>
<p>The post <a href="https://www.duomy.com/products/dm-sc08-io-link-master/">DM-SC08 8-Port IO-Link Master, IP67</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-MR10 Miniature Rotary Actuator, 10 N·m</title>
		<link>https://www.duomy.com/products/dm-mr10-miniature-rotary-actuator/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:22 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-mr10-miniature-rotary-actuator/</guid>

					<description><![CDATA[<p>Compact rotary actuator with 10 N·m torque, 0.05° repeatability and RS485 control, for valve, shutter and indexing duties where a gearbox would be too large.</p>
<p>The post <a href="https://www.duomy.com/products/dm-mr10-miniature-rotary-actuator/">DM-MR10 Miniature Rotary Actuator, 10 N·m</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-MR10 provides controlled rotation in a package small enough to mount directly on a valve stem or a shutter shaft. A brushless motor drives through a low-backlash planetary stage, and an absolute encoder reports position over RS485 without a homing cycle at power-up.</p>
<p>The absolute encoder is the practical difference in valve and damper applications: after a power loss the actuator knows where it is and moves to the commanded position without driving the mechanism against a stop. Torque is limited electronically, so a jammed valve stalls the actuator instead of damaging it.</p>
<h2>Key features</h2>
<ul>
<li>10 N·m continuous torque, 25 N·m peak</li>
<li>0.05° repeatability with absolute encoder feedback</li>
<li>RS485 Modbus control, optional 0-10 V or 4-20 mA</li>
<li>Electronic torque limiting and stall detection</li>
<li>Manual override hex on the output shaft</li>
<li>IP65 housing, -10 to +60 °C operating range</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Quarter-turn valve and damper actuation</li>
<li>Optical shutter and filter wheel indexing</li>
<li>Rotary indexing tables in assembly machines</li>
<li>Adjustable orifice and louvre control</li>
</ul>
<h2>Sizing note</h2>
<p>Size on the running torque plus a 50% margin for breakaway and fouling, not on the nameplate torque alone. A valve that has not moved for six months needs more torque to break away than the datasheet friction figure suggests.</p>
<p>The post <a href="https://www.duomy.com/products/dm-mr10-miniature-rotary-actuator/">DM-MR10 Miniature Rotary Actuator, 10 N·m</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-SC04 4-Channel Isolating Signal Conditioner</title>
		<link>https://www.duomy.com/products/dm-sc04-signal-conditioner/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:22 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-sc04-signal-conditioner/</guid>

					<description><![CDATA[<p>Four-channel DIN-rail signal conditioner with universal input, 1,500 V isolation and 4-20 mA / 0-10 V output. Solves earth loops and drive noise in compact panels.</p>
<p>The post <a href="https://www.duomy.com/products/dm-sc04-signal-conditioner/">DM-SC04 4-Channel Isolating Signal Conditioner</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-SC04 puts four isolated channels into a 22.5 mm DIN-rail module. Each channel accepts 4-20 mA, 0-10 V, RTD, thermocouple or potentiometer input and produces a 4-20 mA or 0-10 V output, with 1,500 VAC isolation between input, output and supply.</p>
<p>The practical value is in retrofits. When a panel picks up noise from a new variable frequency drive, or when a sensor in another building creates an earth loop, adding an isolating conditioner at the panel boundary fixes the signal without touching the sensor, the cable route or the PLC card.</p>
<h2>Key features</h2>
<ul>
<li>Four isolated channels in a 22.5 mm DIN-rail module</li>
<li>Universal input: mA, V, RTD, thermocouple, potentiometer</li>
<li>1,500 VAC three-way galvanic isolation</li>
<li>0.1% of span accuracy with 10-50 ms response</li>
<li>DIP switch configuration, no software required</li>
<li>Removable terminals and channel status LEDs</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Breaking earth loops on long analogue runs</li>
<li>Rejecting common-mode noise from VFDs and welders</li>
<li>Converting RTD or thermocouple signals to 4-20 mA</li>
<li>Standardising mixed signals in a retrofit panel</li>
</ul>
<h2>Wiring note</h2>
<p>Isolation removes the conductive path, but it does not fix a bad shield termination. Bond the cable shield at one end only, keep the shield continuous through junction boxes, and separate signal cable from drive output cable by at least 200 mm in the duct.</p>
<p>The post <a href="https://www.duomy.com/products/dm-sc04-signal-conditioner/">DM-SC04 4-Channel Isolating Signal Conditioner</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-MA08 Piezo Micro Actuator, 8 µm Stroke, 0.1 nm Resolution</title>
		<link>https://www.duomy.com/products/dm-ma08-piezo-actuator/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:21 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-ma08-piezo-actuator/</guid>

					<description><![CDATA[<p>Piezo stack micro actuator with 8 µm open-loop stroke, 0.1 nm resolution and microsecond response, for optical alignment and nanometre positioning.</p>
<p>The post <a href="https://www.duomy.com/products/dm-ma08-piezo-actuator/">DM-MA08 Piezo Micro Actuator, 8 µm Stroke, 0.1 nm Resolution</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-MA08 is a solid-state actuator: a stack of ceramic layers expands when voltage is applied, with no gears, screws or bearings in the motion path. There is nothing to wear and nothing to develop backlash, and the response is fast enough to be used for active vibration damping as well as static positioning.</p>
<p>Resolution is limited by the driver noise, not by the actuator, and reaches 0.1 nm with a low-noise amplifier. The trade-off is stroke: 8 µm open loop, or 10 µm with the optional strain gauge feedback for closed-loop control that removes hysteresis and creep.</p>
<h2>Key features</h2>
<ul>
<li>8 µm open-loop stroke, 10 µm with closed-loop feedback</li>
<li>0.1 nm resolution with a low-noise driver</li>
<li>Microsecond response, suitable for active damping</li>
<li>Optional integrated strain gauge for closed-loop control</li>
<li>Vacuum-compatible version for chamber use</li>
<li>Preloaded housing for push and pull operation</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Optical path length and mirror alignment</li>
<li>Nanometre positioning on inspection stages</li>
<li>Active vibration cancellation</li>
<li>Micro-dispensing and valve actuation</li>
</ul>
<h2>Driver requirement</h2>
<p>A piezo actuator needs a dedicated amplifier, not a DC supply. We supply a matched 0-150 V amplifier with USB and 0-10 V control, and we recommend ordering actuator and amplifier as a pair so the calibration covers both.</p>
<p>The post <a href="https://www.duomy.com/products/dm-ma08-piezo-actuator/">DM-MA08 Piezo Micro Actuator, 8 µm Stroke, 0.1 nm Resolution</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-MA25 Linear Micro Actuator, 25 mm Stroke, 80 N</title>
		<link>https://www.duomy.com/products/dm-ma25-linear-micro-actuator/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:20 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-ma25-linear-micro-actuator/</guid>

					<description><![CDATA[<p>Motorised linear micro actuator with 25 mm stroke, 80 N force and 1 µm resolution. Stepper drive with integrated encoder and limit switches for gripper jaw and fixture adjustment.</p>
<p>The post <a href="https://www.duomy.com/products/dm-ma25-linear-micro-actuator/">DM-MA25 Linear Micro Actuator, 25 mm Stroke, 80 N</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-MA25 converts rotary motor motion into precise linear travel through a preloaded ball screw and a crossed-roller guide. The preload removes the axial play that makes a cheap screw drive lose position when the load direction reverses, which is the difference between a 1 µm resolution specification and a 1 µm resolution that holds.</p>
<p>The stepper motor with an integrated 1,000 line encoder gives closed-loop position control, so a missed step is corrected rather than accumulated. Limit switches at both ends protect the mechanism during homing, and the whole assembly is 25 mm wide, which fits inside a gripper body.</p>
<h2>Key features</h2>
<ul>
<li>25 mm stroke, 80 N continuous force, 200 N peak</li>
<li>1 µm resolution with closed-loop encoder feedback</li>
<li>Preloaded ball screw and crossed-roller guide, no backlash</li>
<li>Integrated end-of-travel limit switches</li>
<li>Step/direction, 0-10 V or RS485 control interface</li>
<li>Anodised aluminium body, 25 mm wide, 420 g</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Gripper jaw adjustment for product changeover</li>
<li>Fixture and stop positioning</li>
<li>Probe and sensor fine positioning</li>
<li>Dosing syringe and valve actuation</li>
</ul>
<h2>Application note</h2>
<p>Resolution is not accuracy. Mount the actuator on a flat, stiff surface; a flexing bracket will show up as position error at the tool. If the application needs sub-micron holding, add a piezo fine stage rather than asking a screw drive to do both jobs.</p>
<p>The post <a href="https://www.duomy.com/products/dm-ma25-linear-micro-actuator/">DM-MA25 Linear Micro Actuator, 25 mm Stroke, 80 N</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>DM-PC18 M18 Capacitive Proximity Sensor, 8 mm, IO-Link</title>
		<link>https://www.duomy.com/products/dm-pc18-capacitive-proximity-sensor/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 31 Oct 2026 09:33:19 +0000</pubDate>
				<guid isPermaLink="false">https://www.duomy.com/products/dm-pc18-capacitive-proximity-sensor/</guid>

					<description><![CDATA[<p>M18 capacitive proximity sensor that detects plastics, glass, wood and liquids, with 8 mm adjustable sensing distance, IO-Link parameterisation and PNP output.</p>
<p>The post <a href="https://www.duomy.com/products/dm-pc18-capacitive-proximity-sensor/">DM-PC18 M18 Capacitive Proximity Sensor, 8 mm, IO-Link</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></description>
										<content:encoded><![CDATA[<h2>Overview</h2>
<p>The DM-PC18 detects what an inductive sensor cannot: plastic containers, glass bottles, cardboard, wood and bulk material. The sensing field is capacitive, so any material with a dielectric constant above about 1.5 will trigger it, and the sensitivity potentiometer or IO-Link parameter sets the threshold for the specific product.</p>
<p>The IO-Link version matters on lines with frequent product changes. Instead of an operator adjusting a potentiometer behind a guard, the switching threshold and the output logic are stored in the recipe and downloaded over IO-Link when the product changes.</p>
<h2>Key features</h2>
<ul>
<li>8 mm adjustable sensing distance, non-flush mountable</li>
<li>Detects plastics, glass, wood, paper and liquids</li>
<li>IO-Link 1.1 parameterisation plus PNP switching output</li>
<li>Sensitivity adjustment by potentiometer or IO-Link</li>
<li>IP67 PBT housing with M12 connector</li>
<li>Switching frequency 100 Hz, suited to presence detection</li>
</ul>
<h2>Typical applications</h2>
<ul>
<li>Bottle, cap and label presence on filling lines</li>
<li>Level detection through a plastic tank wall</li>
<li>Cardboard and wood board detection in packaging</li>
<li>Product changeover with recipe-based thresholds</li>
</ul>
<h2>Application note</h2>
<p>Capacitive sensors are affected by humidity and by product residue on the face. Mount them where the face stays clear, and use IO-Link diagnostics to detect a threshold that is drifting before it causes a missed detection.</p>
<p>The post <a href="https://www.duomy.com/products/dm-pc18-capacitive-proximity-sensor/">DM-PC18 M18 Capacitive Proximity Sensor, 8 mm, IO-Link</a> appeared first on <a href="https://www.duomy.com">DuoMy Sensing</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
