DM-FILM-PP-105J-63
Ask about this product
Send your application details and get a specification answer within one business day.
100 nF 100 V Metallized Polyester Film Capacitor, Radial
Metallized polyester (PET) film capacitor, 100 nF ±10%, 100 V DC, 5 mm lead pitch, radial box case. Stable, self-healing coupling and filtering capacitor for through-hole boards.
| Parameter | Value | Unit |
|---|---|---|
| Capacitance | 100 | nF |
| Tolerance | ±10 | % |
| Rated voltage | 100 | V DC |
| Lead pitch | 5.0 | mm |
| Case | Radial box, 7.2 × 2.5 × 6.5 | mm |
| Dissipation factor | ≤1.0 | % at 1 kHz |
| Insulation resistance | ≥30,000 | MΩ |
| Voltage derating | 1.6 × rated at 85 °C | |
| Dielectric | Metallized polyester (PET) | |
| Operating temperature | −55 to +105 | °C |
Overview
A metallized polyester film capacitor is the through-hole generalist: stable, self-healing after a dielectric breakdown, and inexpensive in the 1 nF to 1 µF range. Where a ceramic would change value with voltage and temperature, the film part holds its capacitance, which is why it survives in filters and coupling positions that have been in production for decades.
Self-healing is the property worth understanding. A breakdown vaporises a microscopic area of metallization and clears the fault, so the capacitor loses a fraction of its capacitance instead of failing short. That behaviour is what makes film acceptable across the AC line in an X2 part.
Key features
- Self-healing metallized construction
- Stable capacitance with voltage and temperature
- 5 mm lead pitch fits standard through-hole layouts
- Low dissipation factor at audio and low frequencies
- Radial box case with epoxy seal
Typical applications
- Signal coupling and DC blocking
- RC and LC filter networks
- Timing circuits
- Snubbers on low-power switching devices
Selection note
Polyester has a higher dissipation factor than polypropylene. For a resonant or high-frequency AC position, specify polypropylene instead.
Ordering
Send the capacitance, voltage, pitch and application. We confirm the dielectric type against the AC content of the waveform, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-X2-225K-275
2.2 µF 275 V AC X2 EMI Suppression Capacitor
DM-FILM-PLS-103K-1K