DM-RLY-5V-SPDT-1A
Ask about this product
Send your application details and get a specification answer within one business day.
12 V Power Relay, SPDT, 10 A 250 V AC, PCB Mount
PCB power relay, 12 V coil, SPDT contacts rated 10 A at 250 V AC, sealed case. Switching mains loads from a low-voltage control circuit.
| Parameter | Value | Unit |
|---|---|---|
| Coil voltage | 12 | V DC |
| Coil resistance | 400 | Ω ±10% |
| Coil power | 360 | mW |
| Contact configuration | SPDT (1 Form C) | |
| Contact rating | 10 | A at 250 V AC / 10 A at 30 V DC |
| Contact resistance | 100 | mΩ maximum |
| Electrical life | 100,000 | operations at rated load |
| Dielectric strength | 1,500 | V AC between coil and contact |
| Package | PCB mount, 29 × 12.7 × 15.7 | mm |
| Terminals | 5 pins, 3.5 mm spacing |
Overview
A 10 A contact rating at 250 V AC is the workhorse specification: pumps, heaters, contactor coils, lamps. The relay gives a low-voltage controller a way to switch a mains load with a 1,500 V AC barrier between the two circuits and no leakage current.
The contact rating depends on the load type. A resistive 10 A load is what the data sheet means; a motor or a capacitive load draws a surge at switch-on and derates the rating substantially. Where the load is inductive, an RC snubber across the contacts extends life.
Key features
- 10 A at 250 V AC contact rating
- 12 V coil, 360 mW
- 1,500 V AC coil-to-contact isolation
- 100,000 electrical operations at rated load
- Sealed case, PCB mounting
Typical applications
- Pump and heater switching
- Lighting and lamp loads
- Contactor and valve coil driving
- Appliance mains switching
Selection note
Derate the contact rating for inductive or capacitive loads. A 10 A resistive rating does not mean a 10 A motor, and a snubber across the contacts is cheap insurance.
Ordering
Send the coil voltage, load type, current and voltage. We confirm the rating against the load and recommend suppression, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-SSR-25A-240V
Solid-State Relay, 25 A 240 V AC, Zero-Cross
DM-RLY-24V-DPDT-5A