DM-XTAL-25M-3225
Ask about this product
Send your application details and get a specification answer within one business day.
16 MHz Ceramic Resonator, 3-Pin with Built-In Capacitors
Three-pin ceramic resonator, 16 MHz ±0.5%, with built-in load capacitors. A clock reference that needs no external capacitors and starts reliably at low cost.
| Parameter | Value | Unit |
|---|---|---|
| Frequency | 16 | MHz |
| Tolerance | ±0.5 | % |
| Frequency stability | ±0.3 | % over −20 to +80 °C |
| Built-in capacitance | 15 | pF per side |
| Resonant impedance | 30 | Ω maximum |
| Case | 3-pin, 4.5 × 2.0 × 4.0 | mm |
| Operating temperature | −40 to +85 | °C |
| Aging | ±0.3 | % over 10 years |
| Mounting | Through-hole, 2.5 mm pitch | |
| Packaging | 1,000 pcs / bag |
Overview
A ceramic resonator is a quartz crystal with a wider tolerance and a much lower price, and the three-pin version has the load capacitors built into the package. For a microcontroller that talks to a display and a relay board, ±0.5% is enough: the UART stays in sync because both ends are on the same clock, and nothing else in the system cares.
It is not enough for anything that has to agree with the outside world on time: Ethernet, USB, RTC or a radio protocol all need the accuracy of a quartz crystal. That is the decision point, not the price.
Key features
- Built-in load capacitors, no external parts
- ±0.5% tolerance, adequate for asynchronous UART links
- Reliable start-up at low drive levels
- Three-pin through-hole package
- Lower cost than a quartz crystal
Typical applications
- Microcontroller clocks in cost-sensitive products
- Appliance and HVAC control boards
- Display and keypad controllers
- Non-critical serial links
Selection note
Do not use a resonator for Ethernet, USB, RTC or any radio protocol. Those need quartz accuracy, and the failure appears as intermittent link drops rather than an obvious fault.
Ordering
Send the frequency, the accuracy the protocol needs and the package preference. We confirm whether a resonator is adequate or a crystal is required, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-XTAL-8M-3225
8 MHz Crystal, 3.2 × 2.5 mm, ±10 ppm
DM-XTAL-32768-3215