DM-TAN-106K-16-A
Ask about this product
Send your application details and get a specification answer within one business day.
22 µF 16 V Solid Tantalum Capacitor, B Case
Moulded solid tantalum chip capacitor, 22 µF ±10%, 16 V, B case (3.5 × 2.8 mm), 0.8 Ω ESR. Bulk capacitance for 5 V and 12 V rails in a package smaller than an electrolytic.
| Parameter | Value | Unit |
|---|---|---|
| Capacitance | 22 | µF |
| Tolerance | ±10 | % |
| Rated voltage | 16 | V DC |
| Case | B (3.5 × 2.8) | mm |
| ESR at 100 kHz | 0.8 | Ω |
| Leakage current | ≤3.5 | µA at 25 °C |
| Ripple current | 0.35 | A rms at 100 kHz, 85 °C |
| Operating temperature | −55 to +125 | °C |
| Termination | Sn-plated, polarity band | |
| Packaging | 2,000 pcs / reel |
Overview
Twenty-two microfarad in a 3.5 × 2.8 mm case is where the tantalum starts to replace the small aluminium electrolytic: same bulk capacitance, no electrolyte to dry out, no height, and a capacitance that does not drift with age. It is the usual output capacitor behind a 5 V linear regulator on a board that has to last ten years.
ESR of 0.8 Ω sets the ripple limit. At 0.35 A rms the part is comfortable in a linear supply but will heat in the output of a switching converter; for that position the low-ESR D case or a polymer part is the correct choice.
Key features
- 22 µF in a 3.5 × 2.8 mm B case
- No electrolyte, no wear-out curve with age
- Capacitance stable with applied voltage
- 0.8 Ω ESR for general filtering
- Reflow-compatible moulded body
Typical applications
- Output capacitance behind linear regulators
- Bulk decoupling on 5 V and 12 V rails
- Industrial control boards with long service life
- Replacement for small SMD electrolytics
Selection note
In a switching converter output, calculate the ripple heating from ESR before choosing this part. Above roughly 0.2 A rms, move to a low-ESR or polymer type.
Ordering
Send the rail voltage, ripple current and available footprint. We compare solid tantalum against polymer for the position, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-PTAN-157M-16-D
150 µF 16 V Polymer Tantalum Capacitor, D Case
DM-TAN-107M-10-DL