DM-BR-1A-1000V-DIP
Ask about this product
Send your application details and get a specification answer within one business day.
2 A 1000 V Bridge Rectifier, DIP-4
Single-phase bridge rectifier, 2 A, 1000 V, DIP-4 package, 1.1 V forward drop, 50 A surge. Higher current in the same footprint for small switching supplies.
| Parameter | Value | Unit |
|---|---|---|
| Average forward current | 2 | A |
| Repetitive reverse voltage | 1000 | V |
| Forward voltage per diode | 1.1 | V at 2 A |
| Peak surge current | 50 | A |
| Leakage current | 5 | µA at 1000 V |
| Package | DIP-4, in-line | |
| Case | 8.0 × 5.0 × 2.8 | mm |
| Lead pitch | 2.54 | mm |
| Operating junction temperature | −55 to +150 | °C |
| Mounting | Through-hole |
Overview
Two amps in the same 2.54 mm lead pattern as the 1 A part means a board can be upgraded without a layout change, which is often the reason a design uses this package at all. It suits the input of a 20 to 40 W switching supply where the rectified bus feeds a small converter.
The surge rating of 50 A is the number that matters at switch-on: the input capacitor charges through the bridge, and that current is limited only by the line impedance. If the capacitor bank is large, an inrush limiter belongs in series with the bridge.
Key features
- 2 A average current, 50 A surge
- 1000 V reverse voltage
- Same 2.54 mm footprint as the 1 A part
- 1.1 V forward drop per diode
- Through-hole DIP-4 package
Typical applications
- Input rectification for 20 to 40 W supplies
- Auxiliary rails in industrial controls
- Charger front ends
- Appliance control boards
Selection note
Size the input capacitor and the surge rating together. A bridge chosen for its average current alone will still fail at switch-on if the capacitor bank is much larger than the rating allows.
Ordering
Send the load current, input capacitor size and input voltage. We confirm the surge margin, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-BR-10A-1000V-GBU
10 A 1000 V Bridge Rectifier, GBU
DM-BR-3PH-25A-1600V