DM-MOS-60N-30A-TO220
Ask about this product
Send your application details and get a specification answer within one business day.
−30 V P-Channel MOSFET, SOT-23, 4.3 A, 45 mΩ
−30 V P-channel MOSFET in SOT-23, 4.3 A continuous, 45 mΩ on-resistance at −10 V gate drive. Load switches, reverse-polarity protection and power-path control in small assemblies.
| Parameter | Value | Unit |
|---|---|---|
| Drain-source voltage | −30 | V |
| Continuous drain current | −4.3 | A |
| On-resistance, RDS(on) | 45 | mΩ at VGS = −10 V |
| On-resistance at −4.5 V | 65 | mΩ |
| Gate threshold voltage | −1.0 to −2.2 | V |
| Gate charge | 9.5 | nC typical |
| Power dissipation | 1.4 | W at TA = 25 °C |
| Package | SOT-23 | |
| Channel | P-channel, enhancement mode | |
| Operating junction temperature | −55 to +150 | °C |
Overview
A P-channel device in the high side of a supply path needs no charge pump: pull the gate low and the part conducts, pull it to the rail and it blocks. That simplicity is why SOT-23 P-channel FETs still sit at the input of small boards as reverse-polarity protection and as a load switch for sub-circuits that must be powered down.
Forty-five milliohms at 4.3 A is fine for a 2 A load and marginal beyond that. The SOT-23 package dissipates through its three legs and the pad under them, so a 3 A continuous load in a warm enclosure needs copper area, not just a bigger part number.
Key features
- P-channel high-side switching without a gate driver IC
- −30 V rating suitable for 12 V and 24 V inputs
- 45 mΩ at −10 V gate drive, 65 mΩ at −4.5 V
- SOT-23 package for dense assemblies
- Low gate charge for direct logic-level control
Typical applications
- Reverse-polarity protection on DC inputs
- Load switches for peripheral sub-circuits
- Power-path selection between battery and adapter
- Battery-powered equipment sleep-state isolation
Selection note
For loads above 2 A continuous, check the junction temperature with the actual copper area. A SOT-23 in still air is limited by the board, not by the silicon.
Ordering
Send the input voltage range, load current and control logic level. We confirm whether a P-channel or an N-channel with a driver is the better fit, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-MOS-30N-60A-DFN56
30 V N-Channel MOSFET, DFN5×6, 60 A, 3.5 mΩ
DM-MOS-100N-120A-D2PAK
100 V N-Channel MOSFET, D2PAK, 120 A, 6 mΩ
DM-MOS-650N-40A-TO247