DM-MOV-07D-130
Ask about this product
Send your application details and get a specification answer within one business day.
14 mm Metal-Oxide Varistor, 275 V AC
Metal-oxide varistor, 14 mm disc, 275 V AC continuous, 430 V at 1 mA, 100 J energy absorption. Line-to-line surge clamping at the input of industrial equipment.
| Parameter | Value | Unit |
|---|---|---|
| Continuous AC voltage | 275 | V rms |
| Continuous DC voltage | 350 | V |
| Varistor voltage at 1 mA | 430 | V ±10% |
| Clamping voltage at 25 A | 710 | V |
| Energy absorption | 100 | J for 2 ms |
| Peak current, 8/20 µs | 4,500 | A |
| Disc diameter | 14 | mm |
| Capacitance at 1 kHz | 450 | pF |
| Lead pitch | 7.5 | mm |
| Operating temperature | −40 to +85 | °C |
Overview
A varistor is a voltage-dependent resistor: high resistance at the operating voltage, low resistance above its threshold, so a surge is diverted into the device instead of into the circuit behind it. The 430 V threshold on a 275 V AC line leaves headroom for normal mains variation and clamps before the insulation of the equipment is stressed.
Every surge event consumes part of the device. The 100 J rating is the total energy it can absorb before the disc degrades, and a varistor that has taken repeated hits drifts to a lower threshold and eventually fails short. That is why a failed varistor is usually found as a short circuit at the input, not as an open.
Key features
- 275 V AC continuous rating for 230 V mains
- 100 J energy absorption, 4,500 A peak current
- 430 V threshold with ±10% tolerance
- 14 mm disc, 7.5 mm lead pitch
- Fails short, which is detectable at the input
Typical applications
- AC input surge protection
- Protection ahead of a switching supply
- Industrial equipment on exposed mains
- Motor drive input transient clamping
Selection note
A varistor needs a fuse or a breaker ahead of it. When it fails short, that fuse is what removes the fault current; without it, the varistor becomes the fault.
Ordering
Send the mains voltage, expected surge level and the fuse rating upstream. We confirm the disc size and energy rating, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-TVS-ESD-5V-2L
ESD Protection Array, 5 V, 2-Line, SOT-23
DM-TVS-SMB-33A