DM-TVS-SMB-33A
Ask about this product
Send your application details and get a specification answer within one business day.
ESD Protection Array, 5 V, 2-Line, SOT-23
Two-line bidirectional ESD protection array, 5 V standoff, 12 pF line capacitance, SOT-23. Clamping for USB, HDMI and other high-speed interfaces without distorting the signal.
| Parameter | Value | Unit |
|---|---|---|
| Standoff voltage | 5 | V |
| Clamping voltage at 1 A | 9.8 | V |
| Lines protected | 2, bidirectional | |
| Line capacitance | 12 | pF at 1 MHz |
| ESD rating | ±15 | kV contact discharge |
| Peak pulse current | 5 | A at 8/20 µs |
| Leakage current | 0.1 | µA at 5 V |
| Package | SOT-23 | |
| Operating temperature | −40 to +125 | °C |
| Channel configuration | Common ground, two signal lines |
Overview
An ESD array is a TVS optimised for one job: absorb a human-body discharge at a connector without adding enough capacitance to ruin the signal. Twelve picofarads keeps a USB 2.0 or full-speed differential pair intact, while a general-purpose 500 pF TVS would round off the edges and destroy the eye diagram.
The clamping voltage of 9.8 V at 1 A is what protects the transceiver behind it. The interface IC sees a short excursion to under 10 V instead of the kilovolt that arrived at the connector, which is within what its own internal diodes can survive.
Key features
- Two bidirectional lines in one SOT-23
- 12 pF line capacitance for high-speed data
- ±15 kV contact discharge rating
- Clamping at 9.8 V, compatible with 5 V logic
- Low leakage, 0.1 µA at 5 V
Typical applications
- USB 2.0 and Type-C data line protection
- HDMI and display interface protection
- Keypad and button lines at an enclosure entry
- External connector protection on portable equipment
Selection note
Keep the protected trace and the ground return parallel and short. The clamp only works if the discharge current can return to the connector without crossing the circuit it is protecting.
Ordering
Send the interface type, data rate and line voltage. We confirm the capacitance and clamping level, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-MOV-14D-275
14 mm Metal-Oxide Varistor, 275 V AC
DM-MOV-07D-130