DM-PM-HB-600V-15A
Ask about this product
Send your application details and get a specification answer within one business day.
5 W Isolated DC-DC Converter, 24 V to 5 V, SIP-4
Isolated DC-DC converter module, 18 to 36 V input, 5 V 1 A output, 1.5 kV isolation, SIP-4 package. A complete isolated rail without a transformer design.
| Parameter | Value | Unit |
|---|---|---|
| Input voltage range | 18 to 36 | V DC |
| Output voltage | 5 | V DC |
| Output current | 1 | A |
| Output power | 5 | W |
| Isolation voltage | 1,500 | V DC |
| Efficiency | 78 | % typical at full load |
| Ripple and noise | 80 | mV peak to peak |
| Package | SIP-4, 19.5 × 6.0 × 10 | mm |
| Switching frequency | 100 | kHz |
| Operating temperature | −40 to +85 | °C |
Overview
An isolated DC-DC module is a transformer, a controller and a feedback loop in a 20 mm package. It exists because designing an isolated 5 W supply from discrete parts is a week of work and a stack of magnetics samples, while the module is a single line on the bill of materials.
The isolation is what it is bought for: breaking a ground loop between a sensor front end and a controller, or powering a communication interface that must float relative to the main circuit. At 1.5 kV it covers functional isolation, not the reinforced isolation a mains-facing circuit requires.
Key features
- 18 to 36 V input, 5 V 1 A output
- 1.5 kV DC isolation between input and output
- SIP-4 package, no external components
- 78% efficiency at full load
- Short-circuit protected output
Typical applications
- Isolated sensor and interface supplies
- Breaking ground loops in measurement systems
- RS-485 and CAN bus isolation
- Auxiliary rails in industrial controls
Selection note
A 5 W module in a sealed enclosure needs derating above 70 °C. Check the derating curve and, if the load is continuous at full current, mount the module where air can reach it.
Ordering
Send the input range, output voltage and current, and the isolation class required. We confirm the module against the load profile, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-IPM-600V-10A
600 V 10 A Intelligent Power Module, Three-Phase
DM-DCDC-20W-9-36-12