DM-DCDC-20W-9-36-12
Ask about this product
Send your application details and get a specification answer within one business day.
600 V 15 A IGBT Half-Bridge Module
IGBT half-bridge module, 600 V 15 A per switch, with matched freewheeling diodes and isolated baseplate. One part carries the whole commutation loop for a half-bridge stage.
| Parameter | Value | Unit |
|---|---|---|
| Collector-emitter voltage | 600 | V |
| Current per switch | 15 | A at TC = 80 °C |
| Configuration | Half bridge, 2 switches | |
| Saturation voltage | 1.8 | V at 15 A |
| Diode forward voltage | 1.7 | V at 15 A |
| Isolation voltage | 2,500 | V AC |
| Package | Module, 34 × 26 × 12 | mm |
| Terminals | Solder pins, power and gate | |
| Thermal resistance, junction to case | 1.6 | °C/W |
| Operating junction temperature | −40 to +150 | °C |
Overview
A half-bridge module puts both switches and their diodes inside one package, so the commutation loop is defined by the manufacturer instead of by your layout. That is the whole value: the loop inductance that causes turn-off overshoot is fixed and characterised, rather than depending on how the board was routed.
It also removes the isolated mounting problem. The baseplate is isolated from the terminals, so the module bolts to an earthed heatsink and the gate driver only has to bridge the gate-to-emitter isolation, not the full bus voltage.
Key features
- Two IGBTs and two diodes in one package
- Characterised commutation loop
- Isolated baseplate, 2,500 V AC
- Solder-pin power and gate terminals
- 1.6 °C/W junction-to-case
Typical applications
- Half-bridge and full-bridge inverters
- Motor drive output stages
- Induction heating generators
- Welding and plasma supplies
Selection note
Follow the gate driver layout in the module data sheet. The internal loop is characterised, but the gate loop is still yours, and a long gate return reintroduces the ringing the module was meant to remove.
Ordering
Send the bus voltage, switching frequency, current and topology. We confirm the module class and gate driver requirement, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-DCDC-5W-24-5-SIP
5 W Isolated DC-DC Converter, 24 V to 5 V, SIP-4
DM-IPM-600V-10A