DM-SSD-100V-150M-SOD323
Ask about this product
Send your application details and get a specification answer within one business day.
600 V 8 A Fast-Recovery Rectifier, TO-220
600 V 8 A fast-recovery epitaxial rectifier in TO-220, 35 ns recovery time, 1.7 V forward drop. Clamping, snubbing and output rectification in offline switching supplies.
| Parameter | Value | Unit |
|---|---|---|
| Repetitive reverse voltage | 600 | V |
| Average forward current | 8 | A at TC = 100 °C |
| Forward voltage | 1.7 | V at 8 A, 25 °C |
| Reverse recovery time | 35 | ns |
| Reverse recovery charge | 75 | nC |
| Peak surge current | 80 | A |
| Package | TO-220, two-lead | |
| Thermal resistance, junction to case | 2.5 | °C/W |
| Operating junction temperature | −55 to +150 | °C |
| Mounting | Through-hole with heatsink tab |
Overview
A fast-recovery diode is what a hard-switched offline converter uses where a Schottky cannot go: 600 V blocking with a 35 ns recovery time, short enough that the turn-off loss stays manageable at tens of kilohertz. Typical positions are the output rectifier of a flyback, the clamp diode across a primary, and the snubber in a bridge leg.
Recovery charge of 75 nC still has to be paid at every switching cycle, and it appears as a current spike through the opposing switch. Soft-recovery behaviour matters more than the headline trr figure, because a diode that snaps off excites the layout inductance and turns the spike into EMI.
Key features
- 600 V blocking with 35 ns reverse recovery
- Low recovery charge for hard-switched topologies
- 8 A average current with a heatsink tab
- Epitaxial construction for consistent recovery
- TO-220 package for serviceable assemblies
Typical applications
- Output rectification in flyback converters
- RCD clamps across primary windings
- Snubber diodes in bridge legs
- Freewheeling in offline motor drives
Selection note
At switching frequencies above roughly 100 kHz, recovery loss becomes the dominant term. Consider silicon carbide if the efficiency target cannot absorb it.
Ordering
Send the topology, switching frequency, reverse voltage and current waveform. We confirm the recovery class and thermal margin, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-SBD-40V-3A-SMA
40 V 3 A Schottky Barrier Rectifier, SMA
DM-SBD-100V-10A-TO220