DM-LOGIC-4051
Ask about this product
Send your application details and get a specification answer within one business day.
8-Bit Shift Register with Output Latches, 74HC595, SOIC-16
8-bit serial-in, parallel-out shift register with output latches, 74HC595 function, 2 to 6 V supply, SOIC-16. Eight outputs from three microcontroller pins, with a latch to hold them.
| Parameter | Value | Unit |
|---|---|---|
| Function | 8-bit shift register with latches | |
| Supply voltage | 2.0 to 6.0 | V |
| Output current per pin | ±6 | mA at 5 V |
| Shift frequency | 30 | MHz at 5 V |
| Latch | Separate storage register clock | |
| Output enable | Active low, high impedance | |
| Cascade output | Serial out for chaining | |
| Package | SOIC-16 | |
| Input levels | CMOS, 0.7 × VCC high | |
| Operating temperature | −40 to +85 | °C |
Overview
Three microcontroller pins drive eight outputs, and the separate latch means the outputs change all at once when the data is ready instead of rippling through as the bits shift in. That is what makes it usable for driving relays, LEDs or a segment display without visible glitches.
Chaining is the other half of the value: the serial output feeds the next device, so sixteen or twenty-four outputs cost the same three pins. The limit is current, not count: 6 mA per pin means the part drives LEDs and logic inputs, and anything heavier needs a driver stage.
Key features
- Eight outputs from three control lines
- Separate latch register for glitch-free updates
- Serial output for cascading
- High-impedance output enable
- 2 to 6 V supply range
Typical applications
- Relay and LED bank drivers
- Seven-segment and dot-matrix displays
- Output expansion on microcontroller boards
- Keypad and switch matrix scanning
Selection note
The latch clock is separate from the shift clock. Tying them together produces outputs that change while the register is still shifting, which shows up as flicker on a display.
Ordering
Send the output count, load type and supply voltage. We confirm the drive current against the load, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-LOGIC-245
Octal Bus Transceiver, 74HC245, SOIC-20
DM-LOGIC-1G14