DM-LOGIC-4051
Ask about this product
Send your application details and get a specification answer within one business day.
Single Schmitt-Trigger Inverter, 74LVC1G14, SOT-23-5
Single Schmitt-trigger inverter, 74LVC1G14 function, 1.65 to 5.5 V supply, SOT-23-5. Cleans a slow or noisy edge into a defined logic transition.
| Parameter | Value | Unit |
|---|---|---|
| Function | Single inverting Schmitt trigger | |
| Supply voltage | 1.65 to 5.5 | V |
| Positive-going threshold | 0.7 × VCC | V typical at 3.3 V |
| Negative-going threshold | 0.3 × VCC | V typical at 3.3 V |
| Hysteresis | 0.4 × VCC | V typical |
| Output drive | ±24 | mA at 3.3 V |
| Propagation delay | 4 | ns at 3.3 V |
| Input leakage | 0.1 | µA |
| Package | SOT-23-5 | |
| Operating temperature | −40 to +125 | °C |
Overview
An RC network produces a slow exponential edge, and a plain logic input on a slow edge draws current in both transistors at once while the output chatters. A Schmitt trigger adds 0.4 × VCC of hysteresis so the input crosses the threshold once and the output switches once.
It is the standard fix for a mechanical switch, an optocoupler output, or a long cable carrying a digital signal. One gate, five pins, and the edge problem disappears.
Key features
- 0.4 × VCC hysteresis at 3.3 V
- 1.65 to 5.5 V supply, works with 1.8 V logic
- ±24 mA output drive
- 4 ns propagation delay
- SOT-23-5 package
Typical applications
- Debouncing mechanical switches
- Cleaning optocoupler and sensor outputs
- Reshaping slow edges from RC networks
- Receiving digital signals over long cables
Selection note
Hysteresis solves chatter, not noise immunity. If the input can be pulled outside the supply rails, add a series resistor and a clamp diode before the gate.
Ordering
Send the input signal type, supply voltage and drive requirement. We confirm the threshold levels for your logic family, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-LOGIC-245
Octal Bus Transceiver, 74HC245, SOIC-20
DM-LOGIC-595