DM-IF-RS232-2CH
Ask about this product
Send your application details and get a specification answer within one business day.
Dual-Channel Digital Isolator, 2.5 kVrms, 50 Mbps
Two-channel digital isolator, 2.5 kVrms isolation, 50 Mbps, 3.0 to 5.5 V supplies on both sides, SOIC-8. Replaces an optocoupler where speed and lifetime matter.
| Parameter | Value | Unit |
|---|---|---|
| Channels | 2, both directions configurable | |
| Isolation voltage | 2,500 | V rms for 1 min |
| Data rate | 50 | Mbps |
| Supply voltage | 3.0 to 5.5 | V per side |
| Propagation delay | 12 | ns typical |
| Pulse width distortion | 1 | ns typical |
| Common-mode transient immunity | 50 | kV/µs |
| Supply current | 2.5 | mA per channel at 10 Mbps |
| Package | SOIC-8 | |
| Operating temperature | −40 to +125 | °C |
Overview
A digital isolator does the job of an optocoupler without the LED. There is no emitter to age, no current transfer ratio to drift, and the propagation delay is measured in nanoseconds instead of microseconds, which is why it can carry a 50 Mbps signal that no optocoupler would pass.
The isolation barrier is a thin capacitive layer inside the package, rated at 2.5 kV rms. That covers functional and basic isolation for a 400 V system; reinforced isolation for a mains-facing barrier needs a part with a higher rating and the corresponding creepage distance.
Key features
- 2.5 kV rms isolation, 50 Mbps
- 12 ns propagation delay, 1 ns distortion
- 50 kV/µs common-mode transient immunity
- Independent supplies on each side
- No LED to age, no current transfer ratio drift
Typical applications
- Isolated RS-485 and CAN interfaces
- Gate drive signals to high-side switches
- Isolated ADC and sensor interfaces
- Breaking ground loops in measurement systems
Selection note
Isolation is only as good as the layout. Keep the two ground planes separated under the package, and do not route a trace across the barrier.
Ordering
Send the data rate, isolation class and channel direction. We confirm the package and creepage, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-IF-CANFD-5M
CAN FD Transceiver, 5 Mbps, 5 V, SO-8
DM-IF-RS485-20M