DM-EEP-I2C-256K
Ask about this product
Send your application details and get a specification answer within one business day.
SPI EEPROM, 4 Mbit, 20 MHz, SOIC-8
4 Mbit SPI EEPROM, 20 MHz clock, 3 ms page write and one million erase cycles. For larger configuration tables, event logs and parameter sets that still need byte-level rewrite rather than sector erase.
| Parameter | Value | Unit |
|---|---|---|
| Density | 4 | Mbit (512 KB) |
| Interface | SPI, modes 0 and 3, up to 20 MHz | |
| Supply voltage | 2.5 to 5.5 | V |
| Page size | 256 | bytes |
| Write cycle time | 3 | ms maximum |
| Endurance | 1,000,000 | write cycles per page |
| Data retention | 200 | years |
| Write protection | Status register block protect | |
| Standby current | 2 | µA at 3.3 V |
| Package | SOIC-8 |
Overview
At 4 Mbit the part crosses from storing a handful of bytes to storing a structured record: a parameter set with a hundred fields, a rolling log of the last thousand fault codes, a language table. SPI is used instead of I²C because shifting half a megabyte over a 1 MHz two-wire bus takes long enough to matter at boot.
It still behaves like EEPROM rather than flash: no erase-before-write, no sector management, no bad block table. That simplicity is worth the price premium when the firmware team would otherwise spend a week writing a flash translation layer for a few kilobytes of data.
Key features
- 4 Mbit in 256-byte pages, 2,048 pages total
- 20 MHz SPI, full 512 KB read in about 210 ms
- Byte and page write without a separate erase step
- Block protect bits in the status register
- 2.5 to 5.5 V, drop-in for 3.3 V and 5 V designs
Typical applications
- Parameter sets and recipe storage
- Fault and event logs
- Boot counters and warranty records
- Field-replaceable configuration modules
Selection note
Allow the full 3 ms write time before the next command. Reading the status register in a poll loop is reliable; issuing the next write after a fixed 1 ms delay is not, because write time rises with temperature and with the number of previously written bytes in the page.
Ordering
Send the data volume, update rate, bus voltage and retention requirement. We confirm density and package, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-FLS-NOR-64M
SPI NOR Flash, 64 Mbit, Quad SPI, 104 MHz, SOIC-8
DM-SRAM-SPI-512K