DM-OPT-PT-5KV
Ask about this product
Send your application details and get a specification answer within one business day.
High-Speed Optocoupler, 10 Mbit/s, Logic Output, SOIC-8
Logic-output optocoupler, 10 Mbit/s, 3.75 kVrms isolation, 25 ns propagation delay. For isolating SPI, UART and encoder signals where a phototransistor is too slow and too gain-dependent.
| Parameter | Value | Unit |
|---|---|---|
| Data rate | 10 | Mbit/s |
| Isolation voltage | 3,750 | Vrms, 1 minute |
| Propagation delay | 25 | ns typical |
| Pulse width distortion | 3 | ns typical |
| Supply voltage | 3.0 to 5.5 | V |
| Output type | CMOS push-pull | |
| Common-mode transient immunity | 15 | kV/µs |
| Input current | 5 | mA typical |
| Package | SOIC-8 | |
| Operating temperature | −40 to +100 | °C |
Overview
A phototransistor optocoupler is limited by the base-collector capacitance of the detector, which sets a rise time in the microseconds. A high-speed part puts a photodiode and a CMOS comparator on the output side instead, so the delay drops to tens of nanoseconds and the output is a clean logic level rather than a current.
That removes the CTR problem entirely: the output is digital, so there is no gain to fall out of bed with temperature. The price is that the part needs a supply on both sides, which a phototransistor does not, and the isolation rating is typically lower because the die is smaller.
Key features
- 10 Mbit/s with 25 ns propagation delay
- CMOS output, no CTR or gain calculation needed
- 15 kV/µs common-mode transient immunity
- 3.75 kVrms isolation in an SOIC-8 package
- 3.0 to 5.5 V supply on both sides
Typical applications
- Isolated SPI and UART links
- Encoder and resolver interfaces
- Fieldbus and CAN isolation
- Isolated gate driver signal paths
Selection note
Keep the isolation barrier clear of copper on both sides. A ground pour that crosses under the package defeats the creepage and creates a path for exactly the transient the part is meant to block.
Ordering
Send the data rate, supply voltages, isolation class and delay budget. We confirm the output type and package, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-PE-SLOT-5MM
Slot Photointerrupter, 5 mm Gap, Phototransistor, PCB Mount
DM-PE-DIF-300