DM-FUSE-520-63A-T
Ask about this product
Send your application details and get a specification answer within one business day.
PTC Resettable Fuse, 1.1 A 60 V, Radial
Radial polymer PTC resettable fuse, 1.1 A hold current, 60 V, 2.2 A trip current. Self-resetting overcurrent protection for ports and low-voltage branches.
| Parameter | Value | Unit |
|---|---|---|
| Hold current | 1.1 | A at 25 °C |
| Trip current | 2.2 | A at 25 °C |
| Maximum voltage | 60 | V DC |
| Maximum fault current | 40 | A |
| Initial resistance | 0.09 to 0.17 | Ω |
| Post-trip resistance | 0.25 | Ω maximum |
| Time to trip at 5 A | 2.5 | s |
| Package | Radial, 5.1 mm lead spacing | |
| Operating temperature | −40 to +85 | °C |
| Recovery | Automatic after power removal |
Overview
A PTC does not blow; it heats, changes resistance by orders of magnitude, and holds the current to a trickle until the fault is removed. That behaviour suits ports and branches where a technician cannot reach a fuse, and where an intermittent fault should not require a service call.
The catch is that a PTC is a thermal device. Hold current falls as ambient rises, so a part rated 1.1 A at 25 °C may only hold 0.7 A at 70 °C. Derate for the real enclosure temperature, and remember that the device stays warm and resistive for a while after the fault clears.
Key features
- Self-resetting, no replacement needed
- 1.1 A hold, 2.2 A trip current at 25 °C
- 60 V maximum, 40 A fault current capability
- Radial package with 5.1 mm lead spacing
- Automatic recovery once the fault is removed
Typical applications
- Port and interface overcurrent protection
- Low-voltage branch protection in enclosures
- Motor stall protection on small actuators
- Equipment in inaccessible locations
Selection note
Derate the hold current for ambient temperature. At 70 °C, expect roughly 60% of the 25 °C rating, and check the derating curve before choosing the part.
Ordering
Send the normal current, trip current required, maximum voltage and ambient temperature. We apply the derating curve and quote the resulting part.
No documents attached yet.
Request documentation →Related products
View allDM-FUSE-1206-2A-SB
1206 Slow-Blow SMD Fuse, 2 A 32 V
DM-FUSE-0603-500M-FA