DM-CMP-DUAL-45N
Ask about this product
Send your application details and get a specification answer within one business day.
Quad Precision Op-Amp, 10 µV Offset, SO-14
Quad precision operational amplifier, 10 µV maximum offset, 0.05 µV/°C drift, 2 MHz gain-bandwidth, SO-14. For instrumentation front ends where offset error dominates the budget.
| Parameter | Value | Unit |
|---|---|---|
| Channels | 4 | |
| Input offset voltage | 10 | µV maximum |
| Offset drift | 0.05 | µV/°C |
| Gain-bandwidth product | 2 | MHz |
| Supply voltage | 4.5 to 36 | V |
| Input bias current | 1 | nA maximum |
| Noise voltage | 8 | nV/√Hz at 1 kHz |
| Common-mode rejection | 120 | dB |
| Package | SO-14 | |
| Operating temperature | −40 to +125 | °C |
Overview
At a gain of 100, a 3 mV offset becomes 300 mV of error, which is why precision instrumentation does not use a general-purpose amplifier. Ten microvolts and 0.05 µV per degree keeps the error at the input of a strain gauge or thermocouple bridge inside the range that a 16-bit converter can resolve.
The 120 dB common-mode rejection matters more than the offset in a bridge circuit, because the bridge sits on top of a common-mode voltage that drifts with the excitation supply. Rejection is what stops that drift from appearing as signal.
Key features
- 10 µV maximum offset, 0.05 µV/°C drift
- 120 dB common-mode rejection
- 2 MHz gain-bandwidth for instrumentation loops
- 8 nV/√Hz noise at 1 kHz
- Four channels in SO-14
Typical applications
- Strain gauge and load cell front ends
- Thermocouple and RTD amplifiers
- Precision current sensing
- Medical and laboratory instrumentation
Selection note
Match the feedback resistors to the offset requirement. A 1% resistor network introduces more error than a 10 µV amplifier, and the two have to be specified together.
Ordering
Send the signal amplitude, required resolution and source impedance. We confirm the noise and offset budget, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-OPA-DUAL-1M-RR