DM-CMP-DUAL-45N
Ask about this product
Send your application details and get a specification answer within one business day.
Single High-Speed Op-Amp, 50 MHz, SOT-23-5
Single high-speed operational amplifier, 50 MHz gain-bandwidth, 30 V/µs slew rate, 3.3 to 5 V supply, SOT-23-5. For fast sensor signals and ADC drivers.
| Parameter | Value | Unit |
|---|---|---|
| Channels | 1 | |
| Gain-bandwidth product | 50 | MHz |
| Slew rate | 30 | V/µs |
| Supply voltage | 3.3 to 5 | V |
| Input offset voltage | ±5 | mV maximum |
| Settling time to 0.1% | 120 | ns |
| Supply current | 6 | mA |
| Output current | 60 | mA |
| Package | SOT-23-5 | |
| Operating temperature | −40 to +125 | °C |
Overview
Fifty megahertz and 30 V/µs is the range where an amplifier can follow a fast sensor without slewing: a photodiode pulse, a current shunt edge, or the output of a multiplexer that switches between channels. Below this bandwidth the amplifier, not the sensor, sets the rise time.
The cost is supply current and stability. Six milliamps per amplifier and a layout that has to treat the feedback node as a transmission line; a few millimetres of stray capacitance at the inverting input will make a 50 MHz part oscillate.
Key features
- 50 MHz gain-bandwidth, 30 V/µs slew rate
- 120 ns settling to 0.1%
- 60 mA output current for driving ADC inputs
- SOT-23-5 package
- 3.3 to 5 V single supply
Typical applications
- Photodiode and fast sensor amplifiers
- ADC drivers in multiplexed systems
- Pulse and edge detection
- Video and high-speed signal buffers
Selection note
Keep the feedback trace short and remove copper under the inverting input. Stray capacitance at that node is the usual cause of oscillation in a high-speed amplifier.
Ordering
Send the signal bandwidth, source capacitance and load. We confirm the stability margin and the package, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-OPA-DUAL-1M-RR
Dual Op-Amp, 1 MHz, Rail-to-Rail I/O, SO-8
DM-OPA-QUAD-PREC