DM-USBC-16P-SMT
Ask about this product
Send your application details and get a specification answer within one business day.
USB Type-C Plug, 24-Pin, Solder-Type for Cable Assembly
USB Type-C plug, 24 pins, solder-cup termination for custom cable assemblies, 5 A rated, 10 Gbps. Build overmoulded or field-serviceable Type-C cords to your own length and pinout.
| Parameter | Value | Unit |
|---|---|---|
| Standard | USB 3.2 Gen 2 Type-C plug | |
| Pin count | 24 | |
| Termination | Solder cup, 24 contacts | |
| Rated current | 5 | A |
| Rated voltage | 20 | V DC |
| Data rate | 10 | Gbps |
| Durability | 10,000 | mating cycles |
| Shell | Stainless steel, overmould-ready | |
| Cable entry | Up to 5.5 mm overall diameter | |
| Operating temperature | −30 to +85 | °C |
Overview
A solder-type plug turns a bulk cable into a finished Type-C cord: strip the conductors, solder the 24 contacts, then overmould or shrink-wrap the shell. It is how a panel-mounted port gets a cable of exactly the right length, or how a damaged cord is rebuilt instead of replaced.
Soldering 24 contacts at 0.25 mm pitch by hand is slow and needs a fine tip and magnification. For volume, the same plug is available for automated soldering and overmoulding; for prototypes and repair, hand assembly with a continuity check on every contact is the practical route.
Key features
- 24 solder-cup contacts for custom cable builds
- Supports 5 A charging and 10 Gbps data
- Overmould-ready stainless shell
- Cable entry up to 5.5 mm
- 10,000 mating cycles on the plug side
Typical applications
- Custom-length Type-C cable assemblies
- Panel-mount port to internal board links
- Repair of damaged charging cords
- Prototype and small-batch cable builds
Selection note
Check continuity and insulation between every adjacent pair after soldering. A single bridge between VBUS and a CC line will make the charger refuse to supply power, and the fault is invisible without a meter.
Ordering
Send the cable construction, conductor gauge, overall diameter and required current. We confirm the plug and strain relief, then quote the plug or the finished assembly.
No documents attached yet.
Request documentation →Related products
View allDM-USBC-16P-IPX7
Waterproof USB Type-C Receptacle, IPX7, 16-Pin
DM-USBC-24P-G2-MID