DM-MLCC-0603-105K-25
Ask about this product
Send your application details and get a specification answer within one business day.
0402 X7R MLCC, 100 nF 50 V, ±10%
0402 X7R multilayer ceramic capacitor, 100 nF ±10%, 50 V DC, −55 to +125 °C. The default decoupling part for 3.3 V and 5 V rails, supplied on 7-inch reels for SMT assembly.
| Parameter | Value | Unit |
|---|---|---|
| Case size | 0402 (1.0 × 0.5) | mm |
| Dielectric | X7R | |
| Capacitance | 100 | nF |
| Tolerance | ±10 | % |
| Rated voltage | 50 | V DC |
| Operating temperature | −55 to +125 | °C |
| Temperature characteristic | ±15 over range | % |
| Insulation resistance | ≥10 | GΩ |
| Termination | Ni barrier, Sn plating | |
| Packaging | 10,000 pcs / 7-inch reel |
Overview
A 100 nF X7R in 0402 is the workhorse bypass capacitor on almost every digital board: small enough to sit under a BGA escape, large enough to hold a power pin through a switching transient. X7R keeps its capacitance within ±15% from −55 °C to +125 °C, so the same part covers a sealed enclosure in summer and an unheated cabinet in winter.
The one thing that decides whether it works is DC bias. X7R is a Class II dielectric, and capacitance falls as the applied voltage rises. On a 50 V part running at 5 V the loss is small; on a 50 V part pushed to 24 V it is not. Check the derating curve for the rail voltage you actually have, and if the margin is thin, move up a case size or down a dielectric class rather than accepting a capacitor that is only nominally 100 nF.
Key features
- 0402 body, 1.0 × 0.5 mm, suited to dense SMT layouts
- X7R dielectric, stable across the full −55 to +125 °C range
- 50 V rating leaves headroom for 12 V and 24 V rails
- Nickel barrier termination with tin plating for reflow soldering
- Reel packaging compatible with standard 8 mm tape feeders
Typical applications
- Decoupling of MCU, FPGA and SoC supply pins
- Bulk and bypass capacitance on 3.3 V and 5 V rails
- RC filtering in sensor front ends and ADC references
- Charge pump and gate drive bypass in small power stages
Selection note
If the circuit needs a capacitor that does not change value with voltage or temperature, specify C0G instead of X7R. X7R is the right choice when capacitance per volume matters more than absolute stability.
Ordering
Send us the MLCC part number you use today together with the annual quantity. We confirm dielectric, tolerance, voltage and reel size against the equivalent, then quote. Pricing, MOQ and lead time are given per line item.
No documents attached yet.
Request documentation →Related products
View allDM-MLCC-1206-106M-16
1206 X5R MLCC, 10 µF 16 V, ±20%
DM-MLCC-0805-103J-100
0805 C0G MLCC, 10 nF 100 V, ±5%
DM-MLCC-1210-226K-25