DM-MLCC-1210-226K-25
Ask about this product
Send your application details and get a specification answer within one business day.
1206 X5R MLCC, 10 µF 16 V, ±20%
1206 X5R multilayer ceramic capacitor, 10 µF ±20%, 16 V. High-capacitance ceramic for DC-DC output filtering where an electrolytic would be too tall or too short-lived.
| Parameter | Value | Unit |
|---|---|---|
| Case size | 1206 (3.2 × 1.6) | mm |
| Dielectric | X5R | |
| Capacitance | 10 | µF |
| Tolerance | ±20 | % |
| Rated voltage | 16 | V DC |
| Operating temperature | −55 to +85 | °C |
| Temperature characteristic | ±15 from −55 to +85 | % |
| Insulation resistance | ≥0.5 | GΩ |
| Termination | Ni barrier, Sn plating | |
| Packaging | 2,000 pcs / 7-inch reel |
Overview
Ten microfarad in a 1206 replaces a small aluminium electrolytic in most point-of-load converters, with lower ESR, no polarity and no lifetime curve. It is the usual choice for the output bank of a 5 V or 12 V buck stage, and for input bypass where the supply comes in on a short cable.
X5R is rated to +85 °C rather than +125 °C, which is the main reason it costs less than X7R at the same capacitance. If the board sits next to a heatsink or inside a sealed enclosure, check the ambient at the capacitor rather than at the enclosure wall, and step up to X7R when the margin is not there.
Key features
- 10 µF in a 3.2 × 1.6 mm body
- Low ESR and ESL compared with an aluminium electrolytic
- No polarity reversal failure mode
- Suits reflow assembly with standard 1206 pads
- Cost-effective where the ambient stays below 85 °C
Typical applications
- Output filtering on step-down converters
- Input bypass on 12 V and 5 V supply entries
- Local storage for motor and solenoid drivers
- Replacement for small SMD electrolytics in new designs
Selection note
X5R capacitance falls under DC bias and at low temperature. At 12 V on a 16 V part, plan on a significant loss against the nameplate value and verify with the derating curve.
Ordering
Share the working voltage, required capacitance and available board area. We propose the package and dielectric that hold the value under bias, then quote per reel.
No documents attached yet.
Request documentation →Related products
View allDM-MLCC-0805-103J-100
0805 C0G MLCC, 10 nF 100 V, ±5%
DM-MLCC-0402-104K-50
0402 X7R MLCC, 100 nF 50 V, ±10%
DM-MLCC-0603-105K-25