DM-FB-0805-102-300M
Ask about this product
Send your application details and get a specification answer within one business day.
0603 Ferrite Bead, 600 Ω at 100 MHz, 500 mA
Surface-mount ferrite bead in 0603, 600 Ω impedance at 100 MHz, 500 mA rated current, 0.35 Ω DC resistance. Damping for high-frequency noise on supply and signal lines.
| Parameter | Value | Unit |
|---|---|---|
| Impedance at 100 MHz | 600 | Ω ±25% |
| Rated current | 500 | mA |
| DC resistance | 0.35 | Ω maximum |
| Case | 0603 (1.6 × 0.8) | mm |
| Impedance at 1 GHz | 900 | Ω typical |
| Operating temperature | −55 to +125 | °C |
| Material | Multilayer ferrite | |
| Termination | Sn-plated | |
| Packaging | 4,000 pcs / reel | |
| Tolerance | ±25 | % |
Overview
A ferrite bead is a frequency-dependent resistor: near zero impedance at DC, several hundred ohms at 100 MHz. That shape is what makes it useful on a supply pin, where it passes the DC current the circuit needs while damping the high-frequency current that would otherwise radiate off the board.
The rated current is a thermal limit, not a signal limit. At 500 mA the 0.35 Ω resistance dissipates 87 mW, which the 0603 body can shed. Push 1 A through the same part and the impedance collapses as the ferrite saturates, so the bead stops filtering at exactly the current where the noise is worst.
Key features
- 600 Ω at 100 MHz, 900 Ω at 1 GHz
- 500 mA rated current, 0.35 Ω DCR
- 0603 body for placement next to the pin
- Multilayer construction, no winding resonance
- Reflow-compatible terminations
Typical applications
- Supply pin filtering on ICs and modules
- Damping of clock and data line ringing
- Isolation between analogue and digital supplies
- Cable and connector entry filtering
Selection note
Check the impedance at the frequency that actually causes the problem. A bead chosen for 100 MHz does little for a 10 MHz resonance, and the impedance curve is not flat.
Ordering
Send the noise frequency, line current and available footprint. We confirm the impedance curve at that frequency, then quote per reel.
No documents attached yet.
Request documentation →Related products
View allDM-CMC-2X10MH-15A
Common-Mode Choke, 2 × 10 mH, 1.5 A, Through-Hole
DM-CMC-2X51UH-100M