DM-FB-0603-601-500M
Ask about this product
Send your application details and get a specification answer within one business day.
Common-Mode Choke, 2 × 10 mH, 1.5 A, Through-Hole
Through-hole common-mode choke, 2 × 10 mH, 1.5 A per winding, 250 V AC. Differential current cancels in the core while common-mode noise sees the full inductance.
| Parameter | Value | Unit |
|---|---|---|
| Inductance per winding | 10 | mH |
| Rated current | 1.5 | A per winding |
| Rated voltage | 250 | V AC |
| DC resistance | 0.35 | Ω per winding |
| Impedance at 1 MHz | 2,000 | Ω typical |
| Core | Toroidal, nanocrystalline | |
| Case | Through-hole, 18 × 14 × 16 | mm |
| Insulation, winding to winding | 1,500 | V AC |
| Operating temperature | −40 to +105 | °C |
| Mounting | PCB through-hole, 4 pins |
Overview
A common-mode choke is two windings on one core, wired so that the supply current flows in opposite directions. The magnetic flux from the differential current cancels, so the core does not saturate at the operating current, while common-mode noise flowing the same way in both windings sees the full inductance.
That asymmetry is the whole point. A single inductor of 10 mH carrying 1.5 A would be large and would saturate; the choke delivers the same common-mode impedance in a 18 mm toroid because the working flux cancels. It is the second stage of almost every mains filter.
Key features
- 2 × 10 mH on a single toroidal core
- 1.5 A per winding without saturation
- 1,500 V AC winding-to-winding insulation
- 2 kΩ impedance at 1 MHz
- Four-pin through-hole mounting
Typical applications
- Mains input EMI filters
- Common-mode noise suppression on supply lines
- Motor drive input filtering
- Industrial power entry modules
Selection note
Keep the two windings separated on the layout and avoid routing a trace between them. Capacitive coupling across the choke bypasses the inductance and defeats the filter at high frequency.
Ordering
Send the line current, mains voltage and target attenuation. We confirm the inductance and insulation class, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-FB-0805-102-300M
0805 Ferrite Bead, 1 kΩ at 100 MHz, 300 mA
DM-CMC-2X51UH-100M