DM-FB-0603-601-500M
Ask about this product
Send your application details and get a specification answer within one business day.
Signal Common-Mode Choke, 2 × 51 µH, 100 mA, SMD
Surface-mount common-mode choke, 2 × 51 µH, 100 mA, four-terminal package. For CAN, RS-485 and USB differential pairs that need common-mode impedance without loading the signal.
| Parameter | Value | Unit |
|---|---|---|
| Inductance per winding | 51 | µH |
| Rated current | 100 | mA |
| DC resistance | 0.9 | Ω per winding |
| Impedance at 10 MHz | 600 | Ω typical |
| Case | SMD, 4-terminal, 3.2 × 2.5 | mm |
| Rated voltage | 50 | V DC |
| Cut-off frequency | 100 | MHz typical |
| Operating temperature | −40 to +105 | °C |
| Termination | Sn-plated | |
| Packaging | 2,000 pcs / reel |
Overview
On a differential bus, the signal is the voltage between two conductors and the noise is usually the voltage on both of them together. A common-mode choke passes the differential signal because the currents cancel in the core, and blocks the common-mode component because both currents flow the same way.
Fifty-one microhenry is the value that keeps the eye diagram intact at CAN and RS-485 data rates while still attenuating the common-mode component that radiates from the cable. At 100 mA it suits a signal line, not a power pair.
Key features
- 2 × 51 µH for differential bus lines
- 600 Ω common-mode impedance at 10 MHz
- Four-terminal SMD package, 3.2 × 2.5 mm
- Differential signal passes with minimal distortion
- 100 mA rated current per winding
Typical applications
- CAN and CAN FD bus filtering
- RS-485 and RS-422 lines
- USB and Ethernet magnetics
- Sensor bus entries on industrial equipment
Selection note
Route the pair as a tightly coupled differential trace through the choke and keep the two windings on the correct sides. Reversing one winding turns the choke into a series inductor for the signal.
Ordering
Send the bus type, data rate and common-mode noise level. We confirm the inductance and cut-off, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-FB-0805-102-300M
0805 Ferrite Bead, 1 kΩ at 100 MHz, 300 mA
DM-CMC-2X10MH-15A