DM-TB-508-2P
Ask about this product
Send your application details and get a specification answer within one business day.
3.5 mm PCB Screw Terminal Block, 4-Pin, 300 V 10 A
3.5 mm pitch PCB screw terminal block, 4 poles, 300 V 10 A, side-entry wire connection. Compact fixed terminal for signal and low-power wiring on dense boards.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 3.5 | mm |
| Poles | 4 | |
| Rated voltage | 300 | V AC/DC |
| Rated current | 10 | A |
| Wire range | 0.2 to 1.5 | mm² |
| Wire range, AWG | 24 to 16 | AWG |
| Clamping | Screw, wire protector | |
| Entry | Side entry, 180° | |
| Housing | PA66, UL94 V-0 | |
| Operating temperature | −40 to +105 | °C |
Overview
Fixed screw terminals are the cheapest way to make a board field-wirable: no mating plug, no separate part number to lose, and the wire goes straight into the connector. At 3.5 mm pitch a four-pole block occupies 14 mm of board edge, which fits on boards that cannot spare the width of a 5.08 mm part.
The limitation is service. Every wire has to be removed individually, and there is no way to pre-wire the harness on a bench. Where a machine will be rewired more than once, a pluggable block is worth the extra part cost.
Key features
- 3.5 mm pitch, 4 poles in 14 mm
- 300 V, 10 A rating
- Side entry for wiring along the board edge
- Wire protector under the screw to avoid strand damage
- PA66 housing rated UL94 V-0
Typical applications
- Signal wiring on compact control boards
- Sensor and actuator connections
- Low-power distribution
- Boards with limited edge space
Selection note
Tighten to the torque given in the drawing. Under-torque leaves a high-resistance joint; over-torque cracks the housing and the pole breaks off at the base.
Ordering
Send the pole count, pitch, wire gauge and current. We confirm the entry direction and pin numbering, then quote per block.
No documents attached yet.
Request documentation →Related products
View allDM-TB-DIN-25
DIN-Rail Terminal Block, 2.5 mm², 800 V 24 A
DM-TB-50-SC-6P