DM-TB-50-SC-6P
Ask about this product
Send your application details and get a specification answer within one business day.
5.08 mm Pluggable Terminal Block, 2-Pin, 300 V 15 A
5.08 mm pitch pluggable terminal block, 2 poles, 300 V 15 A, screw clamp plug with mating header. Field-wiring connector for control panels and power distribution boards.
| Parameter | Value | Unit |
|---|---|---|
| Pitch | 5.08 | mm |
| Poles | 2 | |
| Rated voltage | 300 | V AC/DC |
| Rated current | 15 | A |
| Wire range, solid | 0.2 to 2.5 | mm² |
| Wire range, AWG | 24 to 14 | AWG |
| Clamping | Screw, rising cage | |
| Contact material | Tin-plated brass | |
| Housing | PA66, UL94 V-0 | |
| Strip length | 7 | mm |
Overview
A pluggable terminal block splits the connection into two parts: a header soldered to the board and a plug that carries the field wiring. The panel can be wired on the bench, tested, and then plugged in as one assembly, which is why almost every industrial controller uses this structure instead of a fixed screw terminal.
The rising cage clamp is the detail that matters for reliability. The screw drives a cage that lifts, so the conductor sits between two flat surfaces rather than being twisted by the screw tip. That is what lets a stranded wire with a ferrule survive vibration without loosening.
Key features
- Pluggable plug and mating header
- Rising cage screw clamp for stranded and solid wire
- 300 V, 15 A rating per pole
- Accepts 0.2 to 2.5 mm² (24 to 14 AWG)
- PA66 housing rated UL94 V-0
Typical applications
- Field wiring on control panels
- Power distribution boards
- Motor and actuator connections
- Removable wiring harness interfaces
Selection note
Use ferrules on stranded wire. A bare stranded conductor under a cage clamp spreads and loses contact area, and the joint heats up under load.
Ordering
Send the pole count, wire gauge, current and voltage. We confirm the plug and header pairing, then quote as a set or as separate parts.
No documents attached yet.
Request documentation →Related products
View allDM-TB-DIN-25
DIN-Rail Terminal Block, 2.5 mm², 800 V 24 A
DM-TB-35-4P