DM-WH-IDC10-300
Ask about this product
Send your application details and get a specification answer within one business day.
4-Wire Harness, XH 2.54 to Tinned Leads, 300 mm
Four-wire harness, XH 2.54 mm 4-pin housing to tinned flying leads, 300 mm, 24 AWG. Ready-made connection between a board header and a terminal block or sensor.
| Parameter | Value | Unit |
|---|---|---|
| Connector | XH 2.54 mm, 4-pin, female housing | |
| Conductor | 24 AWG stranded, tinned copper | |
| Length | 300 | mm |
| Current rating | 3 | A per conductor |
| Voltage rating | 250 | V AC |
| Insulation | PVC, 300 V | |
| Colours | Red, black, yellow, green | |
| Termination, far end | Tinned, 5 mm strip | |
| Crimp | Crimped and pull-tested | |
| Packaging | 100 pcs / bag |
Overview
A crimped harness removes two failure points from a build: the hand crimp that depends on the operator, and the screw terminal that loosens under vibration. The connector latches onto the header, the far end is tinned for a terminal block, and the assembly is tested before it goes into the box.
Colour coding is not decoration. Red and black for supply, yellow and green for signal, so a technician tracing a fault does not have to meter four identical white wires.
Key features
- Crimped and pull-tested terminations
- Colour-coded conductors
- XH housing latches onto the header
- 24 AWG, 3 A per conductor
- Tinned far end for terminal blocks
Typical applications
- Board to terminal block connections
- Sensor and actuator wiring
- Prototype and small-batch assemblies
- Field replacement harnesses
Selection note
Confirm the header is a 2.54 mm XH type and not a 2.50 mm JST or a Molex equivalent. The housings look alike and do not mate reliably across families.
Ordering
Send the connector type, pin count, length and colour sequence. We build to the drawing and quote from 100 pieces.
No documents attached yet.
Request documentation →Related products
View allDM-WH-PWR-2W-500
Power Harness, 2-Way with Ring Terminals, 16 AWG, 500 mm
DM-WH-M12-4P-2M