DM-WH-XH4-300
Ask about this product
Send your application details and get a specification answer within one business day.
Power Harness, 2-Way with Ring Terminals, 16 AWG, 500 mm
Two-conductor power harness, 16 AWG, 500 mm, M6 ring terminals at one end and tinned leads at the other. Battery and busbar connections with a defined current path.
| Parameter | Value | Unit |
|---|---|---|
| Conductor | 16 AWG, 2 cores | |
| Length | 500 | mm |
| Current rating | 10 | A continuous |
| Voltage rating | 300 | V |
| Termination, one end | M6 insulated ring terminals | |
| Termination, other end | Tinned, 10 mm strip | |
| Insulation | XLPE, 105 °C rated | |
| Colours | Red and black | |
| Sleeving | Braided sleeve over both cores | |
| Packaging | 50 pcs / bag |
Overview
A power harness is specified by its weakest point, and that is usually the termination. A crimped ring terminal on a 16 AWG conductor, with the correct tool and a pull test, carries 10 A without heating; a terminal crimped with pliers carries the same current until it does not.
The braided sleeve over both cores is mechanical protection for the run between a battery and a distribution point. It also keeps the pair together, which reduces the loop area and therefore the magnetic field the harness radiates when the current changes.
Key features
- 16 AWG conductors, 10 A continuous
- M6 insulated ring terminals, crimped and tested
- XLPE insulation rated to 105 °C
- Braided sleeve over both cores
- Colour coded red and black
Typical applications
- Battery to distribution connections
- Busbar and terminal post wiring
- Equipment with a defined current path
- Replacement harnesses on service calls
Selection note
Match the ring terminal to the stud size and the washer stack. An M6 terminal on an M8 stud leaves contact area on one side only, and the joint heats under load.
Ordering
Send the conductor gauge, length, terminal type and current. We confirm the stud size and sleeve, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-WH-M12-4P-2M
M12 A-Coded 4-Pin to Flying Leads, 2 m, PUR
DM-WH-IDC10-300