DM-WH-PWR-2W-500
Ask about this product
Send your application details and get a specification answer within one business day.
IDC 10-Pin Ribbon Cable Assembly, 1.27 mm, 300 mm
Ten-way IDC ribbon cable assembly, 1.27 mm pitch, 300 mm, socket to socket. Mass-terminated flat cable for programming headers and board-to-board links.
| Parameter | Value | Unit |
|---|---|---|
| Connector | 2 × 5 IDC socket, 1.27 mm pitch | |
| Cable | 10-way ribbon, 28 AWG | |
| Length | 300 | mm |
| Current rating | 1 | A per conductor |
| Voltage rating | 30 | V AC/DC |
| Contact plating | Gold flash over nickel | |
| Strain relief | Moulded on both ends | |
| Orientation | Pin 1 marked with red stripe | |
| Termination | Mass crimp, pull-tested | |
| Packaging | 50 pcs / bag |
Overview
An IDC assembly terminates ten conductors in one press instead of ten crimps, which is why it appears wherever a flat cable has to be made quickly and identically: programming headers, JTAG ports, and the link between two boards in the same enclosure.
The red stripe on the ribbon marks pin one, and it is the only thing standing between a correct connection and a reversed one. Check it against the header silkscreen on both ends before power is applied.
Key features
- Mass-terminated 10-way IDC, both ends
- 28 AWG ribbon cable, 1.27 mm pitch
- Moulded strain relief
- Gold flash contacts
- Pin 1 marked with a red stripe
Typical applications
- Programming and debug headers
- Board-to-board links inside an enclosure
- Display and keypad connections
- Test fixture wiring
Selection note
Verify pin 1 orientation at both ends. An IDC connector can be crimped on reversed, and the cable will fit either way on the header.
Ordering
Send the way count, pitch, length and connector gender at each end. We confirm the pinout orientation, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-WH-XH4-300
4-Wire Harness, XH 2.54 to Tinned Leads, 300 mm
DM-WH-M12-4P-2M