DM-CLK-BUF-1TO4
Ask about this product
Send your application details and get a specification answer within one business day.
Clock Generator, 4 Differential Outputs, 1 kHz–200 MHz, I²C
Four-output clock generator with integrated PLLs, programmable from 1 kHz to 200 MHz over I²C. Replaces four discrete oscillators and lets a single 25 MHz reference feed an entire board.
| Parameter | Value | Unit |
|---|---|---|
| Outputs | 4 | independently programmable |
| Output frequency | 1 kHz to 200 | MHz |
| Output type | LVDS, LVPECL or LVCMOS | per output pair |
| Reference input | 10 to 50 | MHz crystal or clock |
| Phase jitter | 0.7 | ps RMS, 12 kHz to 20 MHz |
| Programmable memory | One-time or volatile configuration | |
| Supply voltage | 3.3 | V ±5% |
| Interface | I²C, 400 kHz | |
| Package | QFN-32, 5 × 5 mm | |
| Operating temperature | −40 to +85 | °C |
Overview
Once a board needs three or four unrelated clock frequencies, discrete oscillators stop making sense. Each one costs a placement, a power pin and a bill-of-materials line, and each drifts independently. A single generator with an integrated PLL produces them all from one reference.
The real benefit appears in the lab. Changing a frequency means writing a register over I²C instead of respinning the board for a different oscillator footprint, which is why these parts show up on evaluation boards and prototype hardware far more often than on shipping products.
Key features
- Four independently programmable output frequencies
- 1 kHz to 200 MHz from a single 25 MHz reference
- Sub-picosecond RMS jitter for SerDes and converter clocks
- LVDS, LVPECL and LVCMOS selectable per output
- Configuration stored in on-chip memory or loaded at boot
Typical applications
- Multi-rail FPGA and SoC clock trees
- ADC and DAC sampling clocks
- Networking and SerDes reference clocks
- Prototype boards that need several frequencies
Selection note
Place the reference crystal close to the device and keep the loop filter components on the same side of the board. A generator is only as good as its reference, and a 25 MHz crystal with 30 ppm drift sets the absolute accuracy of every output.
Ordering
Send the required output frequencies, output standards, jitter budget and reference available on the board. We confirm the configuration and programming method, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-RTC-I2C-TCXO
I²C Real-Time Clock, TCXO, ±5 ppm, SOIC-8
DM-OSC-MEMS-50M