DM-OSC-MEMS-50M
Ask about this product
Send your application details and get a specification answer within one business day.
I²C Real-Time Clock, TCXO, ±5 ppm, SOIC-8
I²C real-time clock with an integrated temperature-compensated crystal, ±5 ppm from −40 to +85 °C. Battery switchover and a 2 µA timekeeping current keep calendar time across power loss.
| Parameter | Value | Unit |
|---|---|---|
| Interface | I²C, up to 400 kHz | |
| Accuracy | ±5 | ppm, ±13 s per month |
| Supply voltage | 1.8 to 5.5 | V |
| Backup supply | Automatic switchover to VBAT | |
| Timekeeping current | 2 | µA at 3.0 V |
| Calendar | Seconds to year, leap-year compensation | |
| Alarms | Two programmable alarms | |
| Oscillator | Integrated TCXO, no external crystal | |
| Package | SOIC-8 | |
| Operating temperature | −40 to +85 | °C |
Overview
A plain RTC with an external 32.768 kHz crystal drifts with temperature, typically by 20 ppm over the industrial range, which is about a minute a month. An integrated TCXO corrects for that in hardware, so the firmware does not have to run a compensation table against a temperature sensor.
±5 ppm is still ±13 seconds a month, or about two and a half minutes a year. For time-stamped logs and scheduling that is enough. For anything that must agree with a network clock to the second, the RTC is only there to keep approximate time between synchronisations.
Key features
- ±5 ppm across −40 to +85 °C, no calibration in firmware
- No external crystal or load capacitors required
- Automatic battery switchover with 2 µA timekeeping current
- Two independent alarms plus a programmable square wave
- Wide 1.8 to 5.5 V supply range
Typical applications
- Data logger timestamps
- Schedules, dosing and defrost cycles
- Utility meter time-of-use registers
- Equipment operating-hour counters
Selection note
Fit a battery or supercapacitor on VBAT sized for the expected outage. A 2 µA load drains a 200 mAh coin cell in roughly eleven years, but a 0.1 F supercapacitor holds time for only a few days.
Ordering
Send the accuracy budget, supply voltage, backup duration and alarm requirements. We confirm the timekeeping current against your backup source, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-CLK-BUF-1TO4
Clock Fanout Buffer, 1:4, LVCMOS, 200 MHz, SOIC-8
DM-CLK-GEN-4OUT