DM-RTC-I2C-TCXO
Ask about this product
Send your application details and get a specification answer within one business day.
MEMS Oscillator, 50 MHz, LVCMOS, ±20 ppm, 5032
50 MHz MEMS oscillator in a 5.0 × 3.2 mm package, ±20 ppm, LVCMOS output, 6 mA. No quartz blank, so it survives shock and vibration that crack a crystal.
| Parameter | Value | Unit |
|---|---|---|
| Frequency | 50 | MHz |
| Output | LVCMOS | |
| Frequency stability | ±20 | ppm over −40 to +85 °C |
| Supply voltage | 1.8 to 3.3 | V |
| Current consumption | 6 | mA typical |
| Start-up time | 3 | ms |
| Shock tolerance | 30,000 | g |
| Ageing | ±1.5 | ppm per year |
| Package | 5032, 5.0 × 3.2 mm | |
| Operating temperature | −40 to +85 | °C |
Overview
A quartz oscillator is a tiny tuning fork suspended in a can. It is accurate and cheap, and it fails when the product is dropped, because the blank fractures or the mount breaks. A MEMS resonator is etched silicon, so the same shock that destroys a crystal leaves it working.
The trade-off is phase noise close to the carrier, where quartz is still better. For a microcontroller clock or a communication bus, that difference does not matter; for a radio local oscillator, it does. Choose MEMS when mechanical robustness is the dominant requirement and the jitter specification is modest.
Key features
- Silicon resonator, no quartz blank to fracture
- 30,000 g shock tolerance
- ±20 ppm over the full industrial temperature range
- 3 ms start-up, suitable for fast boot sequences
- 1.8 to 3.3 V supply in a 5.0 × 3.2 mm package
Typical applications
- Handheld and portable instruments
- Vibration-exposed machine mounted electronics
- Microcontroller and FPGA system clocks
- Automotive body and access modules
Selection note
MEMS is the right choice when the product will be dropped or vibrated. If the requirement is low phase noise for RF, use a quartz oscillator instead; the MEMS advantage does not extend to close-in noise.
Ordering
Send the frequency, output standard, stability and shock or vibration environment. We confirm whether MEMS or quartz fits the noise budget, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-CLK-BUF-1TO4
Clock Fanout Buffer, 1:4, LVCMOS, 200 MHz, SOIC-8
DM-CLK-GEN-4OUT