DM-TIM-GREASE-35
Ask about this product
Send your application details and get a specification answer within one business day.
Thermal Gap Pad, 1.5 mm, 3.0 W/m·K, 100 × 100 mm
Silicone thermal gap pad, 1.5 mm thick, 3.0 W/m·K, 100 × 100 mm sheet, UL94 V-0. Fills the gap between a component and a chassis where a rigid heatsink cannot sit flat.
| Parameter | Value | Unit |
|---|---|---|
| Thickness | 1.5 | mm |
| Thermal conductivity | 3.0 | W/m·K |
| Dimensions | 100 × 100 | mm |
| Hardness | Shore 00 35 | |
| Compression | 20 to 50 | % |
| Dielectric strength | 6 | kV/mm |
| Flammability | UL94 V-0 | |
| Volume resistivity | 10¹² | Ω·cm |
| Operating temperature | −40 to +150 | °C |
| Colour | Light grey |
Overview
A gap pad is used where the mechanical stack-up will not allow a rigid heatsink against the component: a module bolted to a chassis with a gap of a millimetre or two, a board that flexes, or a connector that sits at a different height. The pad compresses and fills the gap instead of relying on a machined surface.
Three watts per metre-kelvin in 1.5 mm gives a thermal resistance around 0.5 °C·in²/W, which is adequate for a 10 to 30 W device over a small area. It is not a substitute for direct metal contact on a 200 W device; for that, grease and a flat surface are still better.
Key features
- 3.0 W/m·K in a 1.5 mm gap
- Soft Shore 00 35, compresses at low force
- UL94 V-0 flame rating
- 6 kV/mm dielectric strength, electrically insulating
- Cut to shape from a 100 × 100 mm sheet
Typical applications
- Component to chassis thermal bridging
- Gaps between a module and an enclosure wall
- Vibration-tolerant thermal contact
- Multiple components at different heights
Selection note
Compression matters more than thickness. A pad that is squeezed to 20% conducts far better than one that barely touches, so measure the actual gap and select the thickness accordingly.
Ordering
Send the gap dimension, contact area and dissipation. We confirm the thickness and conductivity, then quote sheets or pre-cut parts.
No documents attached yet.
Request documentation →Related products
View allDM-HS-30-30-15
Extruded Aluminium Heatsink, 30 × 30 × 15 mm
DM-HS-TO220-CLIP