DM-TIM-GP-15-30
Ask about this product
Send your application details and get a specification answer within one business day.
TO-220 Clip-On Heatsink, 25 × 22 × 16 mm
Clip-on aluminium heatsink for TO-220 packages, 25 × 22 × 16 mm, 8 °C/W natural convection. No screws, no drilling, fitted after soldering.
| Parameter | Value | Unit |
|---|---|---|
| Package | TO-220, TO-262 | |
| Dimensions | 25 × 22 × 16 | mm |
| Material | Aluminium alloy | |
| Finish | Tin-plated | |
| Thermal resistance | 8 | °C/W natural convection |
| Mounting | Spring clip, no hardware | |
| Fin count | 6 | |
| Weight | 4 | g |
| Isolation | Requires insulating pad for non-isolated tabs | |
| Operating temperature | −40 to +150 | °C |
Overview
A clip-on heatsink is fitted after the board is soldered, which means the reflow profile never sees it and the assembly step does not need a screwdriver or a torque specification. For a TO-220 dissipating 2 to 4 W in an enclosure, that is usually enough.
The tab of a TO-220 is electrically connected to the drain or collector on most devices, so a metal heatsink puts the switching node on a large surface area. Where that is not acceptable, an insulating pad is required, and it adds about 1 °C/W to the thermal path.
Key features
- Spring clip fitting, no screws
- 8 °C/W natural convection
- Fits TO-220 and TO-262 packages
- Tin-plated for corrosion resistance
- 4 g, no board support needed
Typical applications
- Linear regulator cooling
- Motor drive output devices
- Power supply switching devices
- Field repair and retrofit
Selection note
Check whether the tab is live before fitting a metal heatsink. If it is, use an insulating pad and a shoulder washer, or the heatsink becomes a shock hazard.
Ordering
Send the package type, dissipation and whether isolation is required. We confirm the clip and pad, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-TIM-GREASE-35
Thermal Grease, 3.5 W/m·K, 30 g Syringe
DM-HS-30-30-15