DM-HS-TO220-CLIP
Ask about this product
Send your application details and get a specification answer within one business day.
Thermal Grease, 3.5 W/m·K, 30 g Syringe
Silicone thermal grease, 3.5 W/m·K, 30 g syringe with dispensing nozzle. For metal-to-metal interfaces where the surfaces are flat and the joint is bolted.
| Parameter | Value | Unit |
|---|---|---|
| Thermal conductivity | 3.5 | W/m·K |
| Volume | 30 | g |
| Base | Silicone oil with metal oxide filler | |
| Operating temperature | −50 to +200 | °C |
| Thermal resistance | 0.05 | °C·in²/W at 50 µm |
| Dielectric strength | 5 | kV/mm |
| Bleed | <0.5 | % after 24 h at 150 °C |
| Evaporation | <0.5 | % after 24 h at 150 °C |
| Colour | Grey | |
| Packaging | Syringe with nozzle |
Overview
Thermal grease exists to fill the microscopic air gaps between two metal surfaces. Air conducts at about 0.026 W/m·K, so a joint that looks flat but is 20% air is dominated by the air, not by the metal. A 50 µm film of 3.5 W/m·K grease replaces that air with something a hundred times better.
The application is the whole result. A thin, even film is better than a thick blob: excess grease is pushed out by the mounting force or, worse, stays as a thick layer that adds thermal resistance. A dot in the centre and firm pressure is the reliable method.
Key features
- 3.5 W/m·K silicone grease
- Stable to +200 °C with low bleed and evaporation
- 0.05 °C·in²/W at a 50 µm film
- Electrically insulating, 5 kV/mm
- 30 g syringe with a fine nozzle
Typical applications
- Heatsink to package interfaces
- IGBT and module baseplate mounting
- Replacing dried compound during service
- Metal-to-metal thermal joints
Selection note
Apply a thin film and let the mounting pressure spread it. A thick layer performs worse than a thin one, and the surplus has to go somewhere, usually onto the board.
Ordering
Send the interface area, mounting pressure and temperature. We confirm the compound class and the pack size, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-TIM-GP-15-30
Thermal Gap Pad, 1.5 mm, 3.0 W/m·K, 100 × 100 mm
DM-HS-30-30-15