DM-IND-4R7-10A-1212
Ask about this product
Send your application details and get a specification answer within one business day.
10 µH 6 A Shielded Power Inductor, 8 × 8 mm
Shielded SMD power inductor, 10 µH ±20%, 6 A saturation, 30 mΩ DCR, 8 × 8 × 4 mm. Compact inductor for mid-current buck and boost stages.
| Parameter | Value | Unit |
|---|---|---|
| Inductance | 10 | µH |
| Tolerance | ±20 | % |
| Rated current | 4.5 | A |
| Saturation current | 6 | A |
| DC resistance | 30 | mΩ |
| Case | 8 × 8 × 4 | mm |
| Shielding | Magnetically shielded | |
| Core | Metal alloy powder | |
| Operating temperature | −40 to +125 | °C |
| Termination | Sn-plated electrodes |
Overview
Ten microhenry at 4 mm height suits boards where the converter has to stay flat: sealed control housings, DIN-rail modules, and anything that slides into a card cage. It covers mid-current buck stages from 12 V or 24 V down to 3.3 V and 5 V, and boost stages from a 5 V input.
The 4 mm height comes at the cost of thermal mass, so the rated 4.5 A assumes reasonable copper area under the pads. If the part is expected to run continuously above 3 A, give it a copper pour on both layers rather than a narrow trace.
Key features
- 4 mm maximum height
- Shielded construction, low radiated field
- 6 A saturation current with soft roll-off
- 30 mΩ DCR
- Suitable for automated placement and reflow
Typical applications
- Compact buck converters on control boards
- Boost stages from 5 V inputs
- Sensor and communication module supplies
- Low-profile DIN-rail electronics
Selection note
Thermal performance depends on the copper connected to the pads. Two square centimetres of copper per terminal is a reasonable starting point for continuous operation near the rated current.
Ordering
Send the inductance, peak current and height limit. We return the closest standard part with its saturation and temperature curves, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-IND-1R5-20A-1010