Ask about this product
Send your application details and get a specification answer within one business day.
4.7 µH 10 A Shielded Power Inductor, 12 × 12 mm
Shielded SMD power inductor, 4.7 µH ±20%, 10 A saturation, 14 mΩ DCR, 12 × 12 × 8 mm. For buck converters and DC-DC stages where radiated field must stay low.
| Parameter | Value | Unit |
|---|---|---|
| Inductance | 4.7 | µH |
| Tolerance | ±20 | % |
| Rated current | 8 | A |
| Saturation current | 10 | A |
| DC resistance | 14 | mΩ |
| Case | 12 × 12 × 8 | mm |
| Shielding | Magnetically shielded | |
| Core | Metal alloy powder | |
| Operating temperature | −40 to +125 | °C |
| Termination | Sn-plated electrodes |
Overview
A 4.7 µH shielded inductor at this current level is the standard choice for a 12 V to 5 V or 24 V to 12 V buck stage switching somewhere between 300 and 600 kHz. The metal alloy powder core holds inductance reasonably well as current rises, which keeps the ripple current predictable near full load instead of letting it run away.
Shielding matters more than the datasheet headline in a closed enclosure: an unshielded drum radiates into nearby signal traces, and a shielded part keeps the field inside the can. The trade is a slightly larger footprint and a slightly higher DCR for the same inductance.
Key features
- Magnetically shielded construction for low radiated field
- Metal alloy powder core with soft saturation behaviour
- 10 A saturation current, 8 A rated current
- 14 mΩ DCR to limit conduction loss
- Low-profile 8 mm height for constrained enclosures
Typical applications
- Buck converter output inductors
- Point-of-load DC-DC stages
- LED driver constant-current stages
- Input filters on 12 V and 24 V entries
Selection note
Check the saturation curve at the peak current of your design, not at the average. A converter running 8 A average with 30% ripple peaks near 9.2 A, which is where the inductance has already started to fall.
Ordering
Give us the switching frequency, input and output voltage, and load current. We propose the inductance and current class, then quote the exact part with its saturation curve.
No documents attached yet.
Request documentation →Related products
View allDM-IND-1R5-20A-1010
1.5 µH 20 A Low-Profile Power Inductor, 10 × 10 mm
DM-IND-100-6A-0808