DM-PMIC-LDO-1A-33
Ask about this product
Send your application details and get a specification answer within one business day.
36 V 3 A Synchronous Buck Converter, DFN-10
3 A synchronous step-down converter, 6 to 36 V input, adjustable output from 1 V, 400 kHz switching, DFN-10. Built for 24 V industrial rails with wide input transients.
| Parameter | Value | Unit |
|---|---|---|
| Input voltage range | 6 to 36 | V |
| Output current | 3 | A continuous |
| Output voltage | 1 to 0.9 × VIN | V adjustable |
| Reference voltage | 1.0 | V ±1.5% |
| Switching frequency | 400 | kHz |
| Quiescent current | 60 | µA typical |
| High-side switch resistance | 80 | mΩ |
| Low-side switch resistance | 45 | mΩ |
| Package | DFN-10, 3 × 3 | |
| Operating temperature | −40 to +125 | °C |
Overview
Industrial 24 V rails are not clean. They carry the surge of a contactor opening and the sag of a motor starting, and a converter rated to 36 V has enough margin to survive both without an external clamp. That headroom is the reason this part exists in a catalogue next to lower-voltage converters.
Three amps at 400 kHz fits a 10 µH inductor and two 22 µF ceramics, so the whole stage stays inside a 15 × 20 mm area. The DFN-10 pad needs vias to a ground plane, and the input capacitor should sit directly across VIN and ground with no trace length in between.
Key features
- 6 to 36 V input for 24 V industrial rails
- 3 A continuous output at 400 kHz
- Adjustable output from 1.0 V
- Internal compensation, few external parts
- DFN-10 package with thermal pad
Typical applications
- 24 V to 5 V conversion in control cabinets
- Sensor and communication module supplies
- DIN-rail electronics
- Equipment subject to inductive load transients
Selection note
For inputs that see repeated surges above 40 V, add a TVS or an input clamp ahead of the converter. The 36 V rating is a maximum, not a transient absorption spec.
Ordering
Send the nominal and worst-case input voltage, output current and ambient. We confirm the margin and passive selection, then quote with the layout notes.
No documents attached yet.
Request documentation →Related products
View allDM-PMIC-BUCK-5A-18V
5 A 18 V Synchronous Buck Converter, SO-8EP
DM-PMIC-LSW-DUAL-2A