DM-PMIC-LDO-1A-33
Ask about this product
Send your application details and get a specification answer within one business day.
Dual-Channel Load Switch, 5.5 V 2 A, DFN-8
Dual-channel load switch, 1.2 to 5.5 V input, 2 A per channel, 60 mΩ on-resistance, independent enable pins, DFN-8. Power gating for peripherals and sub-circuits.
| Parameter | Value | Unit |
|---|---|---|
| Input voltage range | 1.2 to 5.5 | V |
| Continuous current | 2 | A per channel |
| On-resistance | 60 | mΩ per channel |
| Channels | 2, independent enable | |
| Quiescent current | 1 | µA shutdown |
| Turn-on rise time | 1 | ms adjustable |
| Reverse current blocking | Yes, when disabled | |
| Package | DFN-8, 2 × 2 | |
| Control logic | Active-high, 1.2 V compatible | |
| Operating temperature | −40 to +85 | °C |
Overview
A load switch lets firmware remove power from a peripheral that is not being used, which is often the cheapest way to hit a standby current target. Two channels in one package cover a radio module and a sensor cluster, each with its own enable pin.
Sixty milliohms at 2 A is 240 mW, so the switch is not free, but it is far cheaper than the quiescent current of the circuitry it disconnects. Adjustable rise time matters when the load has significant input capacitance: a fast edge turns that capacitance into an inrush current that can trip the upstream supply.
Key features
- Two independent channels in a 2 × 2 mm package
- 60 mΩ on-resistance per channel
- Adjustable slew rate to control inrush
- Reverse current blocking when disabled
- 1 µA shutdown current
Typical applications
- Power gating of radio and sensor modules
- Standby current reduction in battery equipment
- Sequenced power-up of sub-circuits
- Fault isolation between functional blocks
Selection note
Size the slew rate against the load capacitance. A 1 ms rise into 100 µF is a 100 mA inrush, which is usually acceptable; a 10 µs rise into the same load is 10 A and is not.
Ordering
Send the rail voltage, per-channel current, load capacitance and control logic level. We confirm the switch and slew setting, then quote.
No documents attached yet.
Request documentation →Related products
View allDM-PMIC-BUCK-3A-36V
36 V 3 A Synchronous Buck Converter, DFN-10
DM-PMIC-BUCK-5A-18V